IBOD.CF(4)IBOD.CF(4)NAMEibod.cf - configuration file for ibod (ISDN Bandwidth On Demand)
DESCRIPTION
This file contains the initial configuration values for the ibod dae‐
mon. Each line contains a keyword and a value.
Boolean attributes are set with 0 or 1 which corresponds to false and
true respectively. A boolean attribute not specified at all is always
false.
Lines beginning with # are treated as comments and will be ignored.
IMPORTANT RULES!
1. Keywords are case sensitive.
2. Kewords must begin at the first column.
3. Keywords and values must be separated by exactly one (1) space or
tab character.
This file is re-read every time ibod receives SIGHUP (1) signal.
OPTIONS
DEVICE <name>
Name of ISDN PPP device. Default is ippp0.
ENABLE 1|0
Enable/disable bandwidth-on-demand. Default is enable (1).
INTERVAL <n>
Specify the sample time interval in ms. Default is 500 ms.
FILTER <n>
Defines "filtering factor". A value of 10 means that the average
bytes/sec value measured over 10 intervals must pass the limit
defined by LIMIT to bring up or down the slave link. Default is
5.
LIMIT <n>
Transfer rate limit in bytes/sec for bringing up or down ISDN
slave channel. Default is 7000.
STAYUP 0|1
Enable/disable slave channel stay up function. If enabled, the
2:nd cannel (slave link) will stay up even if the average
bytes/sec decrease the value defined by LIMIT. In this case the
slave link will stay up until hangup time is reached. (Example:
isdnctrl huptimeout ippp1 60) If disabled the slave link will be
brought down in the same way it was brought up. Default is 0.
STAYUP_TIME <n>
Defines the minimum time in seconds the 2:nd channel will uncon‐
ditionally stay up after it has been brought up. Default value
is 30.
SEE ALSOibod(1) and xibod(1)AUTHOR
Bjoern Smith, Smith@Compound.SE
IBOD.CF(4)