FENCE_AGENT(8)FENCE_AGENT(8)NAMEfence_ipmilan - Fence agent for IPMI over LAN
fence_ilo3 - Fence agent for HP iLO3 (symlink)
fence_ilo4 - Fence agent for HP iLO4 (symlink)
fence_idrac - Fence agent for Dell iDRAC (symlink)
fence_imm - Fence agent for IBM Integrated Management Module (symlink)
DESCRIPTIONfence_ipmilan is an I/O Fencing agent which can be used with machines
controlled by IPMI. This agent calls support software using ipmitool
(http://ipmitool.sf.net/).
To use fence_ipmilan with HP iLO 3 or HP iLO 4 you have to enable lan‐
plus option (lanplus / -P) and increase wait after operation to 4 sec‐
onds (power_wait=4 / -T 4)
fence_ipmilan accepts options on the command line as well as from
stdin. Fenced sends parameters through stdin when it execs the agent.
fence_ipmilan can be run by itself with command line options. This is
useful for testing and for turning outlets on or off from scripts.
PARAMETERS-A IPMI Lan Auth type (md5, password, or none)
-a IPMI Lan IP to talk to
-p Password (if required) to control power on IPMI device
-S Script to retrieve password (if required)
-P Use Lanplus to improve security of connection
-l Username/Login (if required) to control power on IPMI device
-o Operation to perform. Valid operations: on, off, reboot, status,
list, diag, monitor or metadata (Default Value: reboot)
-t Timeout (sec) for IPMI operation
-C Ciphersuite to use (same as ipmitool -C parameter)
-M Method to fence (onoff or cycle) (Default Value: onoff)
-T Wait X seconds after on/off operation (Default Value: 2)
-f Wait X seconds before fencing is started
-L Privilege level on IPMI device
-v Verbose mode
ACTIONS
on Power on machine.
off Power off machine.
reboot Reboot machine.
status This returns the status of the plug/virtual machine.
diag
The operational behavior of this is not known.
list List available plugs with aliases/virtual machines if there is
support for more then one device. Returns N/A otherwise.
monitor
Check if fencing device is running. List available plugs/virtual
machines or get status of machine (if it does not support more).
metadata
Display the XML metadata describing this resource.
STDIN PARAMETERS
auth IPMI Lan Auth type (md5, password, or none)
ipaddr IPMI Lan IP to talk to
passwd Password (if required) to control power on IPMI device
passwd_script
Script to retrieve password (if required)
lanplus
Use Lanplus to improve security of connection
login Username/Login (if required) to control power on IPMI device
action Operation to perform. Valid operations: on, off, reboot, status,
list, diag, monitor or metadata (Default Value: reboot)
timeout
Timeout (sec) for IPMI operation
cipher Ciphersuite to use (same as ipmitool -C parameter)
method Method to fence (onoff or cycle) (Default Value: onoff)
power_wait
Wait X seconds after on/off operation (Default Value: 2)
delay Wait X seconds before fencing is started
privlvl
Privilege level on IPMI device
verbose
Verbose mode
fence_ipmilan (Fence Agent) 2009-10-20 FENCE_AGENT(8)