ACME(1)ACME(1)NAME
acme, win, awd - interactive text windows
SYNOPSISacme [ -ab ] [ -c ncol ] [ -f varfont ] [ -F fixfont ] [ -l loadfile |
file ... ]
win [ command ]
awd [ label ]
DESCRIPTION
Acme manages windows of text that may be edited interactively or by
external programs. The interactive interface uses the keyboard and
mouse; external programs use a set of files served by acme; these are
discussed in acme(4).
Any named files are read into acme windows before acme accepts input.
With the -l option, the state of the entire system is loaded from load‐
file, which should have been created by a Dump command (q.v.), and sub‐
sequent file names are ignored. Plain files display as text; directo‐
ries display as columnated lists of the names of their components, as
in ls -p directory|mc except that the names of subdirectories have a
slash appended.
The -f (-F) option sets the main font, usually variable-pitch (alter‐
nate, usually fixed-pitch); the default is /lib/font/bit/luci‐
dasans/euro.8.font (.../lucm/unicode.9.font). Tab intervals are set to
the width of 4 (or the value of $tabstop) numeral zeros in the appro‐
priate font.
Windows
Acme windows are in two parts: a one-line tag above a multi-line body.
The body typically contains an image of a file, as in sam(1), or the
output of a program, as in an rio(1) window. The tag contains a number
of blank-separated words, followed by a vertical bar character, fol‐
lowed by anything. The first word is the name of the window, typically
the name of the associated file or directory, and the other words are
commands available in that window. Any text may be added after the
bar; examples are strings to search for or commands to execute in that
window. Changes to the text left of the bar will be ignored, unless
the result is to change the name of the window.
If a window holds a directory, the name (first word of the tag) will
end with a slash.
Scrolling
Each window has a scroll bar to the left of the body. The scroll bar
behaves much as in sam(1) or rio(1) except that scrolling occurs when
the button is pressed, rather than released, and continues as long as
the mouse button is held down in the scroll bar. For example, to
scroll slowly through a file, hold button 3 down near the top of the
scroll bar. Moving the mouse down the scroll bar speeds up the rate of
scrolling.
Layout
Acme windows are arranged in columns. By default, it creates two col‐
umns when starting; this can be overridden with the -c option. Place‐
ment is automatic but may be adjusted using the layout box in the upper
left corner of each window and column. Pressing and holding any mouse
button in the box drags the associated window or column. For windows,
just clicking in the layout box grows the window in place: button 1
grows it a little, button 2 grows it as much as it can, still leaving
all other tags in that column visible, and button 3 takes over the col‐
umn completely, temporarily hiding other windows in the column. (They
will return en masse if any of them needs attention.) The layout box
in a window is normally white; when it is black in the center, it
records that the file is `dirty': acme believes it is modified from its
original contents.
Tags exist at the top of each column and across the whole display.
Acme pre-loads them with useful commands. Also, the tag across the top
maintains a list of executing long-running commands.
Typing
The behavior of typed text is similar to that in rio(1) except that the
characters are delivered to the tag or body under the mouse; there is
no `click to type'. (The experimental option -b causes typing to go to
the most recently clicked-at or made window.) The usual backspacing
conventions apply. As in sam(1) but not rio, the ESC key selects the
text typed since the last mouse action, a feature particularly useful
when executing commands. A side effect is that typing ESC with text
already selected is identical to a Cut command (q.v.).
Most text, including the names of windows, may be edited uniformly.
The only exception is that the command names to the left of the bar in
a tag are maintained automatically; changes to them are repaired by
acme.
When a window is in autoindent mode (see the Indent command below) and
a newline character is typed, acme copies leading white space on the
current line to the new line. The option -a causes each window to
start in autoindent mode.
Directory context
Each window's tag names a directory: explicitly if the window holds a
directory; implicitly if it holds a regular file (e.g. the directory
/adm if the window holds /adm/users). This directory provides a con‐
text for interpreting file names in that window. For example, the
string users in a window labeled /adm/ or /adm/keys will be interpreted
as the file name /adm/users. The directory is defined purely textu‐
ally, so it can be a non-existent directory or a real directory associ‐
ated with a non-existent file (e.g. /adm/not-a-file). File names
beginning with a slash are assumed to be absolute file names.
Errors
Windows whose names begin with - or + conventionally hold diagnostics
and other data not directly associated with files. A window labeled
+Errors receives all diagnostics produced by acme itself. Diagnostics
from commands run by acme appear in a window named directory/+Errors
where directory is identified by the context of the command. These
error windows are created when needed.
Mouse button 1
Mouse button 1 selects text just as in sam(1) or rio(1), including the
usual double-clicking conventions.
Mouse button 2
By an action similar to selecting text with button 1, button 2 indi‐
cates text to execute as a command. If the indicated text has multiple
white-space-separated words, the first is the command name and the sec‐
ond and subsequent are its arguments. If button 2 is `clicked'—indi‐
cates a null string—acme expands the indicated text to find a command
to run: if the click is within button-1-selected text, acme takes that
selection as the command; otherwise it takes the largest string of
valid file name characters containing the click. Valid file name char‐
acters are alphanumerics and _ . - + /. This behavior is similar to
double-clicking with button 1 but, because a null command is meaning‐
less, only a single click is required.
Some commands, all by convention starting with a capital letter, are
built-ins that are executed directly by acme:
Cut Delete most recently selected text and place in snarf buffer.
Del Delete window. If window is dirty, instead print a warning; a
second Del will succeed.
Delcol Delete column and all its windows, after checking that windows
are not dirty.
Delete Delete window without checking for dirtiness.
Dump Write the state of acme to the file name, if specified, or
$home/acme.dump by default.
Edit Treat the argument as a text editing command in the style of
sam(1). The full Sam language is implemented except for the
commands k, n, q, and !. The = command is slightly different:
it includes the file name and gives only the line address unless
the command is explicitly =#. The `current window' for the com‐
mand is the body of the window in which the Edit command is exe‐
cuted. Usually the Edit command would be typed in a tag; longer
commands may be prepared in a scratch window and executed, with
Edit itself in the current window, using the 2-1 chord described
below.
Exit Exit acme after checking that windows are not dirty.
Font With no arguments, change the font of the associated window from
fixed-spaced to proportional-spaced or vice versa. Given a file
name argument, change the font of the window to that stored in
the named file. If the file name argument is prefixed by var
(fix), also set the default proportional-spaced (fixed-spaced)
font for future use to that font. Other existing windows are
unaffected.
Get Load file into window, replacing previous contents (after check‐
ing for dirtiness as in Del). With no argument, use the exist‐
ing file name of the window. Given an argument, use that file
but do not change the window's file name.
ID Print window ID number (q.v.).
Incl When opening `include' files (those enclosed in <>) with button
3, acme searches in directories /$objtype/include and
/sys/include. Incl adds its arguments to a supplementary list
of include directories, analogous to the -I option to the com‐
pilers. This list is per-window and is inherited when windows
are created by actions in that window, so Incl is most usefully
applied to a directory containing relevant source. With no
arguments, Incl prints the supplementary list. This command is
largely superseded by plumbing (see plumb(6)).
Indent Set the autoindent mode according to the argument: on and off
set the mode for the current window; ON and OFF set the mode for
all existing and future windows.
Kill Send a kill note to acme-initiated commands named as arguments.
Load Restore the state of acme from a file (default $home/acme.dump)
created by the Dump command.
Local When prefixed to a command run the command in the same file name
space and environment variable group as acme. The environment
of the command is restricted but is sufficient to run bind(1),
9fs (see srv(4)), import(4), etc., and to set environment vari‐
ables such as $objtype.
Look Search in body for occurrence of literal text indicated by the
argument or, if none is given, by the selected text in the body.
New Make new window. With arguments, load the named files into win‐
dows.
Newcol Make new column.
Paste Replace most recently selected text with contents of snarf buf‐
fer.
Put Write window to the named file. With no argument, write to the
file named in the tag of the window.
Putall Write all dirty windows whose names indicate existing regular
files.
Redo Complement of Undo.
Send Append selected text or snarf buffer to end of body; used mainly
with win.
Snarf Place selected text in snarf buffer.
Sort Arrange the windows in the column from top to bottom in lexico‐
graphical order based on their names.
Tab Set the width of tab stops for this window to the value of the
argument, in units of widths of the zero character. With no
arguments, it prints the current value.
Undo Undo last textual change or set of changes.
Zerox Create a copy of the window containing most recently selected
text.
<|> If a regular shell command is preceded by a <, |, or > charac‐
ter, the selected text in the body of the window is affected by
the I/O from the command. The < character causes the selection
to be replaced by the standard output of the command; > causes
the selection to be sent as standard input to the command; and |
does both at once, `piping' the selection through the command
and replacing it with the output.
A common place to store text for commands is in the tag; in fact acme
maintains a set of commands appropriate to the state of the window to
the left of the bar in the tag.
If the text indicated with button 2 is not a recognized built-in, it is
executed as a shell command. For example, indicating date with button
2 runs date(1). The standard and error outputs of commands are sent to
the error window associated with the directory from which the command
was run, which will be created if necessary. For example, in a window
/adm/users executing pwd will produce the output /adm in a (possibly
newly-created) window labeled /adm/+Errors; in a window containing
/sys/src/cmd/sam/sam.c executing mk will run mk(1) in /sys/src/cmd/sam,
producing output in a window labeled /sys/src/cmd/sam/+Errors. The
environment of such commands contains the variable $% with value set to
the filename of the window in which the command is run, and $winid set
to the window's id number (see acme(4)).
Mouse button 3
Pointing at text with button 3 instructs acme to locate or acquire the
file, string, etc. described by the indicated text and its context.
This description follows the actions taken when button 3 is released
after sweeping out some text. In the description, text refers to the
text of the original sweep or, if it was null, the result of applying
the same expansion rules that apply to button 2 actions.
If the text names an existing window, acme moves the mouse cursor to
the selected text in the body of that window. If the text names an
existing file with no associated window, acme loads the file into a new
window and moves the mouse there. If the text is a file name contained
in angle brackets, acme loads the indicated include file from the
directory appropriate to the suffix of the file name of the window
holding the text. (The Incl command adds directories to the standard
list.)
If the text begins with a colon, it is taken to be an address, in the
style of sam(1), within the body of the window containing the text.
The address is evaluated, the resulting text highlighted, and the mouse
moved to it. Thus, in acme, one must type :/regexp or :127 not just
/regexp or 127. (There is an easier way to locate literal text; see
below.)
If the text is a file name followed by a colon and an address, acme
loads the file and evaluates the address. For example, clicking button
3 anywhere in the text file.c:27 will open file.c, select line 27, and
put the mouse at the beginning of the line. The rules about Error
files, directories, and so on all combine to make this an efficient way
to investigate errors from compilers, etc.
If the text is not an address or file, it is taken to be literal text,
which is then searched for in the body of the window in which button 3
was clicked. If a match is found, it is selected and the mouse is
moved there. Thus, to search for occurrences of a word in a file, just
click button 3 on the word. Because of the rule of using the selection
as the button 3 action, subsequent clicks will find subsequent occur‐
rences without moving the mouse.
In all these actions, the mouse motion is not done if the text is a
null string within a non-null selected string in the tag, so that (for
example) complex regular expressions may be selected and applied
repeatedly to the body by just clicking button 3 over them.
Chords of mouse buttons
Several operations are bound to multiple-button actions. After select‐
ing text, with button 1 still down, pressing button 2 executes Cut and
button 3 executes Paste. After clicking one button, the other undoes
the first; thus (while holding down button 1) 2 followed by 3 is a
Snarf that leaves the file undirtied; 3 followed by 2 is a no-op.
These actions also apply to text selected by double-clicking because
the double-click expansion is made when the second click starts, not
when it ends.
Commands may be given extra arguments by a mouse chord with buttons 2
and 1. While holding down button 2 on text to be executed as a com‐
mand, clicking button 1 appends the text last pointed to by button 1 as
a distinct final argument. For example, to search for literal text one
may execute Look text with button 2 or instead point at text with but‐
ton 1 in any window, release button 1, then execute Look, clicking but‐
ton 1 while 2 is held down.
When an external command (e.g. echo(1)) is executed this way, the
extra argument is passed as expected and an environment variable
$acmeaddr is created that holds, in the form interpreted by button 3,
the fully-qualified address of the extra argument.
Support programs
Win creates a new acme window and runs a command (default /bin/rc) in
it, turning the window into something analogous to an rio(1) window.
Executing text in a win window with button 2 is similar to using Send.
Awd loads the tag line of its window with the directory in which it's
running, suffixed -label (default rc); it is intended to be executed by
a cd function for use in win windows. An example definition is
fn cd { builtin cd $1 && awd $sysname }
Applications and guide files
In the directory /acme live several subdirectories, each corresponding
to a program or set of related programs that employ acme's user inter‐
face. Each subdirectory includes source, binaries, and a readme file
for further information. It also includes a guide, a text file holding
sample commands to invoke the programs. The idea is to find an example
in the guide that best matches the job at hand, edit it to suit, and
execute it.
Whenever a command is executed by acme, the default search path
includes the directory of the window containing the command and its
subdirectory $cputype. The program directories in /acme contain appro‐
priately labeled subdirectories of binaries, so commands named in the
guide files will be found automatically when run. Also, acme binds the
directories /acme/bin and /acme/bin/$cputype to the beginning of /bin
when it starts; this is where acme-specific programs such as win and
awd reside.
FILES
$home/acme.dump
default file for Dump and Load; also where state is written if
acme dies or is killed unexpectedly, e.g. by deleting its win‐
dow.
/acme/*/guide
template files for applications
/acme/*/readme
informal documentation for applications
/acme/*/src
source for applications
/acme/*/mips
MIPS-specific binaries for applications
SOURCE
/sys/src/cmd/acme
/acme/bin/source/win
/sys/src/cmd/awd.c
SEE ALSOacme(4)
Rob Pike, Acme: A User Interface for Programmers.
BUGS
With the -l option or Load command, the recreation of windows under
control of external programs such as win is just to rerun the command;
information may be lost.
ACME(1)