Tree::Simple(3) User Contributed Perl Documentation Tree::Simple(3)NAMETree::Simple - A simple tree object
SYNOPSIS
use Tree::Simple;
# make a tree root
my $tree = Tree::Simple->new("0", Tree::Simple->ROOT);
# explicity add a child to it
$tree->addChild(Tree::Simple->new("1"));
# specify the parent when creating
# an instance and it adds the child implicity
my $sub_tree = Tree::Simple->new("2", $tree);
# chain method calls
$tree->getChild(0)->addChild(Tree::Simple->new("1.1"));
# add more than one child at a time
$sub_tree->addChildren(
Tree::Simple->new("2.1"),
Tree::Simple->new("2.2")
);
# add siblings
$sub_tree->addSibling(Tree::Simple->new("3"));
# insert children a specified index
$sub_tree->insertChild(1, Tree::Simple->new("2.1a"));
# clean up circular references
$tree->DESTROY();
DESCRIPTION
This module in an fully object-oriented implementation of a simple
n-ary tree. It is built upon the concept of parent-child relationships,
so therefore every Tree::Simple object has both a parent and a set of
children (who themselves may have children, and so on). Every
Tree::Simple object also has siblings, as they are just the children of
their immediate parent.
It is can be used to model hierarchal information such as a file-
system, the organizational structure of a company, an object
inheritance hierarchy, versioned files from a version control system or
even an abstract syntax tree for use in a parser. It makes no
assumptions as to your intended usage, but instead simply provides the
structure and means of accessing and traversing said structure.
This module uses exceptions and a minimal Design By Contract style. All
method arguments are required unless specified in the documentation, if
a required argument is not defined an exception will usually be thrown.
Many arguments are also required to be of a specific type, for instance
the $parent argument to the constructor must be a Tree::Simple object
or an object derived from Tree::Simple, otherwise an exception is
thrown. This may seems harsh to some, but this allows me to have the
confidence that my code works as I intend, and for you to enjoy the
same level of confidence when using this module. Note however that this
module does not use any Exception or Error module, the exceptions are
just strings thrown with "die".
I consider this module to be production stable, it is based on a module
which has been in use on a few production systems for approx. 2 years
now with no issue. The only difference is that the code has been
cleaned up a bit, comments added and the thorough tests written for its
public release. I am confident it behaves as I would expect it to, and
is (as far as I know) bug-free. I have not stress-tested it under
extreme duress, but I don't so much intend for it to be used in that
type of situation. If this module cannot keep up with your Tree needs,
i suggest switching to one of the modules listed in the "OTHER TREE
MODULES" section below.
CONSTANTS
ROOT
This class constant serves as a placeholder for the root of our
tree. If a tree does not have a parent, then it is considered a
root.
METHODS
Constructor
new ($node, $parent)
The constructor accepts two arguments a $node value and an optional
$parent. The $node value can be any scalar value (which includes
references and objects). The optional $parent value must be a
Tree::Simple object, or an object derived from Tree::Simple.
Setting this value implies that your new tree is a child of the
parent tree, and therefore adds it to the parent's children. If the
$parent is not specified then its value defaults to ROOT.
Mutator Methods
setNodeValue ($node_value)
This sets the node value to the scalar $node_value, an exception is
thrown if $node_value is not defined.
setUID ($uid)
This allows you to set your own unique ID for this specific
Tree::Simple object. A default value derived from the object's hex
address is provided for you, so use of this method is entirely
optional. It is the responsibility of the user to ensure the
value's uniqueness, all that is tested by this method is that $uid
is a true value (evaluates to true in a boolean context). For even
more information about the Tree::Simple UID see the "getUID"
method.
addChild ($tree)
This method accepts only Tree::Simple objects or objects derived
from Tree::Simple, an exception is thrown otherwise. This method
will append the given $tree to the end of it's children list, and
set up the correct parent-child relationships. This method is set
up to return its invocant so that method call chaining can be
possible. Such as:
my $tree = Tree::Simple->new("root")->addChild(Tree::Simple->new("child one"));
Or the more complex:
my $tree = Tree::Simple->new("root")->addChild(
Tree::Simple->new("1.0")->addChild(
Tree::Simple->new("1.0.1")
)
);
addChildren (@trees)
This method accepts an array of Tree::Simple objects, and adds them
to it's children list. Like "addChild" this method will return its
invocant to allow for method call chaining.
insertChild ($index, $tree)
This method accepts a numeric $index and a Tree::Simple object
($tree), and inserts the $tree into the children list at the
specified $index. This results in the shifting down of all
children after the $index. The $index is checked to be sure it is
the bounds of the child list, if it out of bounds an exception is
thrown. The $tree argument's type is verified to be a Tree::Simple
or Tree::Simple derived object, if this condition fails, an
exception is thrown.
insertChildren ($index, @trees)
This method functions much as insertChild does, but instead of
inserting a single Tree::Simple, it inserts an array of
Tree::Simple objects. It too bounds checks the value of $index and
type checks the objects in @trees just as "insertChild" does.
removeChild ($child | $index)>
Accepts two different arguemnts. If given a Tree::Simple object
($child), this method finds that specific $child by comparing it
with all the other children until it finds a match. At which point
the $child is removed. If no match is found, and exception is
thrown. If a non-Tree::Simple object is given as the $child
argument, an exception is thrown.
This method also accepts a numeric $index and removes the child
found at that index from it's list of children. The $index is
bounds checked, if this condition fail, an exception is thrown.
When a child is removed, it results in the shifting up of all
children after it, and the removed child is returned. The removed
child is properly disconnected from the tree and all its references
to its old parent are removed. However, in order to properly clean
up and circular references the removed child might have, it is
advised to call it's "DESTROY" method. See the "CIRCULAR
REFERENCES" section for more information.
addSibling ($tree)
addSiblings (@trees)
insertSibling ($index, $tree)
insertSiblings ($index, @trees)
The "addSibling", "addSiblings", "insertSibling" and
"insertSiblings" methods pass along their arguments to the
"addChild", "addChildren", "insertChild" and "insertChildren"
methods of their parent object respectively. This eliminates the
need to overload these methods in subclasses which may have
specialized versions of the *Child(ren) methods. The one exceptions
is that if an attempt it made to add or insert siblings to the ROOT
of the tree then an exception is thrown.
NOTE: There is no "removeSibling" method as I felt it was probably a
bad idea. The same effect can be achieved by manual upwards traversal.
Accessor Methods
getNodeValue
This returns the value stored in the object's node field.
getUID
This returns the unique ID associated with this particular tree.
This can be custom set using the "setUID" method, or you can just
use the default. The default is the hex-address extracted from the
stringified Tree::Simple object. This may not be a universally
unique identifier, but it should be adequate for at least the
current instance of your perl interpreter. If you need a UUID, one
can be generated with an outside module (there are
many to choose from on CPAN) and the "setUID" method (see
above).
getChild ($index)
This returns the child (a Tree::Simple object) found at the
specified $index. Note that we do use standard zero-based array
indexing.
getAllChildren
This returns an array of all the children (all Tree::Simple
objects). It will return an array reference in scalar context.
getSibling ($index)
getAllSiblings
Much like "addSibling" and "addSiblings", these two methods simply
call "getChild" and "getAllChildren" on the invocant's parent.
getDepth
Returns a number representing the invocant's depth within the
hierarchy of Tree::Simple objects.
NOTE: A "ROOT" tree has the depth of -1. This be because
Tree::Simple assumes that a tree's root will usually not contain
data, but just be an anchor for the data-containing branches. This
may not be intuitive in all cases, so I mention it here.
getParent
Returns the invocant's parent, which could be either ROOT or a
Tree::Simple object.
getHeight
Returns a number representing the length of the longest path from
the current tree to the furthest leaf node.
getWidth
Returns the a number representing the breadth of the current tree,
basically it is a count of all the leaf nodes.
getChildCount
Returns the number of children the invocant contains.
getIndex
Returns the index of this tree within its parent's child list.
Returns -1 if the tree is the root.
Predicate Methods
isLeaf
Returns true (1) if the invocant does not have any children, false
(0) otherwise.
isRoot
Returns true (1) if the invocant's "parent" field is ROOT, returns
false (0) otherwise.
Recursive Methods
traverse ($func, ?$postfunc)
This method accepts two arguments a mandatory $func and an optional
$postfunc. If the argument $func is not defined then an exception
is thrown. If $func or $postfunc are not in fact CODE references
then an exception is thrown. The function $func is then applied
recursively to all the children of the invocant. If given, the
function $postfunc will be applied to each child after the child's
children have been traversed.
Here is an example of a traversal function that will print out the
hierarchy as a tabbed in list.
$tree->traverse(sub {
my ($_tree) = @_;
print (("\t" x $_tree->getDepth()), $_tree->getNodeValue(), "\n");
});
Here is an example of a traversal function that will print out the
hierarchy in an XML-style format.
$tree->traverse(sub {
my ($_tree) = @_;
print ((' ' x $_tree->getDepth()),
'<', $_tree->getNodeValue(),'>',"\n");
},
sub {
my ($_tree) = @_;
print ((' ' x $_tree->getDepth()),
'</', $_tree->getNodeValue(),'>',"\n");
});
size
Returns the total number of nodes in the current tree and all its
sub-trees.
height
This method has also been deprecated in favor of the "getHeight"
method above, it remains as an alias to "getHeight" for backwards
compatability.
NOTE: This is also no longer a recursive method which get's it's
value on demand, but a value stored in the Tree::Simple object
itself, hopefully making it much more efficient and usable.
Visitor Methods
accept ($visitor)
It accepts either a Tree::Simple::Visitor object (which includes
classes derived
from Tree::Simple::Visitor), or an object who has the "visit"
method available
(tested with "$visitor->can('visit')"). If these qualifications
are not met,
and exception will be thrown. We then run the Visitor's "visit"
method giving the
current tree as its argument.
I have also created a number of Visitor objects and packaged them
into the Tree::Simple::VisitorFactory.
Cloning Methods
Cloning a tree can be an extremly expensive operation for large trees,
so we provide two options for cloning, a deep clone and a shallow
clone.
When a Tree::Simple object is cloned, the node is deep-copied in the
following manner. If we find a normal scalar value (non-reference), we
simply copy it. If we find an object, we attempt to call "clone" on it,
otherwise we just copy the reference (since we assume the object does
not want to be cloned). If we find a SCALAR, REF reference we copy the
value contained within it. If we find a HASH or ARRAY reference we copy
the reference and recursively copy all the elements within it
(following these exact guidelines). We also do our best to assure that
circular references are cloned only once and connections restored
correctly. This cloning will not be able to copy CODE, RegExp and GLOB
references, as they are pretty much impossible to clone. We also do not
handle "tied" objects, and they will simply be copied as plain
references, and not re-"tied".
clone
The clone method does a full deep-copy clone of the object, calling
"clone" recursively on all its children. This does not call "clone"
on the parent tree however. Doing this would result in a slowly
degenerating spiral of recursive death, so it is not recommended
and therefore not implemented. What happens is that the tree
instance that "clone" is actually called upon is detached from the
tree, and becomes a root node, all if the cloned children are then
attached as children of that tree. I personally think this is more
intuitive then to have the cloning crawl back up the tree is not
what I think most people would expect.
cloneShallow
This method is an alternate option to the plain "clone" method.
This method allows the cloning of single Tree::Simple object while
retaining connections to the rest of the tree/hierarchy.
Misc. Methods
DESTROY
To avoid memory leaks through uncleaned-up circular references, we
implement the "DESTROY" method. This method will attempt to call
"DESTROY" on each of its children (if it has any). This will result
in a cascade of calls to "DESTROY" on down the tree. It also cleans
up it's parental relations as well.
Because of perl's reference counting scheme and how that interacts
with circular references, if you want an object to be properly
reaped you should manually call "DESTROY". This is especially
nessecary if your object has any children. See the section on
"CIRCULAR REFERENCES" for more information.
fixDepth
Tree::Simple will manage your tree's depth field for you using this
method. You should never need to call it on your own, however if
you ever did need to, here is it. Running this method will traverse
your all the invocant's sub-trees correcting the depth as it goes.
fixHeight
Tree::Simple will manage your tree's height field for you using
this method. You should never need to call it on your own, however
if you ever did need to, here is it. Running this method will
correct the heights of the current tree and all it's ancestors.
fixWidth
Tree::Simple will manage your tree's width field for you using this
method. You should never need to call it on your own, however if
you ever did need to, here is it. Running this method will correct
the widths of the current tree and all it's ancestors.
Private Methods
I would not normally document private methods, but in case you need to
subclass Tree::Simple, here they are.
_init ($node, $parent, $children)
This method is here largely to facilitate subclassing. This method
is called by new to initialize the object, where new's primary
responsibility is creating the instance.
_setParent ($parent)
This method sets up the parental relationship. It is for internal
use only.
_setHeight ($child)
This method will set the height field based upon the height of the
given $child.
CIRCULAR REFERENCES
I have revised the model by which Tree::Simple deals with ciruclar
references. In the past all circular references had to be manually
destroyed by calling DESTROY. The call to DESTROY would then call
DESTROY on all the children, and therefore cascade down the tree. This
however was not always what was needed, nor what made sense, so I have
now revised the model to handle things in what I feel is a more
consistent and sane way.
Circular references are now managed with the simple idea that the
parent makes the descisions for the child. This means that child-to-
parent references are weak, while parent-to-child references are
strong. So if a parent is destroyed it will force all it's children to
detach from it, however, if a child is destroyed it will not be
detached from it's parent.
Optional Weak References
By default, you are still required to call DESTROY in order for things
to happen. However I have now added the option to use weak references,
which alleviates the need for the manual call to DESTROY and allows
Tree::Simple to manage this automatically. This is accomplished with a
compile time setting like this:
use Tree::Simple 'use_weak_refs';
And from that point on Tree::Simple will use weak references to allow
for perl's reference counting to clean things up properly.
For those who are unfamilar with weak references, and how they affect
the reference counts, here is a simple illustration. First is the
normal model that Tree::Simple uses:
+---------------+
| Tree::Simple1 |<---------------------+
+---------------+ |
| parent | |
| children |-+ |
+---------------+ | |
| |
| +---------------+ |
+->| Tree::Simple2 | |
+---------------+ |
| parent |-+
| children |
+---------------+
Here, Tree::Simple1 has a reference count of 2 (one for the original
variable it is assigned to, and one for the parent reference in
Tree::Simple2), and Tree::Simple2 has a reference count of 1 (for the
child reference in Tree::Simple2).
Now, with weak references:
+---------------+
| Tree::Simple1 |.......................
+---------------+ :
| parent | :
| children |-+ : <--[ weak reference ]
+---------------+ | :
| :
| +---------------+ :
+->| Tree::Simple2 | :
+---------------+ :
| parent |..
| children |
+---------------+
Now Tree::Simple1 has a reference count of 1 (for the variable it is
assigned to) and 1 weakened reference (for the parent reference in
Tree::Simple2). And Tree::Simple2 has a reference count of 1, just as
before.
BUGS
None that I am aware of. The code is pretty thoroughly tested (see
"CODE COVERAGE" below) and is based on an (non-publicly released)
module which I had used in production systems for about 3 years without
incident. Of course, if you find a bug, let me know, and I will be sure
to fix it.
CODE COVERAGE
I use Devel::Cover to test the code coverage of my tests, below is the
Devel::Cover report on this module's test suite.
---------------------------- ------ ------ ------ ------ ------ ------ ------
File stmt branch cond sub pod time total
---------------------------- ------ ------ ------ ------ ------ ------ ------
Tree/Simple.pm 99.6 96.0 92.3 100.0 97.0 95.5 98.0
Tree/Simple/Visitor.pm 100.0 96.2 88.2 100.0 100.0 4.5 97.7
---------------------------- ------ ------ ------ ------ ------ ------ ------
Total 99.7 96.1 91.1 100.0 97.6 100.0 97.9
---------------------------- ------ ------ ------ ------ ------ ------ ------
SEE ALSO
I have written a number of other modules which use or augment this
module, they are describes below and available on CPAN.
Tree::Parser - A module for parsing formatted files into Tree::Simple
hierarchies.
Tree::Simple::View - A set of classes for viewing Tree::Simple
hierarchies in various output formats.
Tree::Simple::VisitorFactory - A set of several useful Visitor objects
for Tree::Simple objects.
Tree::Binary - If you are looking for a binary tree, this you might
want to check this one out.
Also, the author of Data::TreeDumper and I have worked together to make
sure that Tree::Simple and his module work well together. If you need
a quick and handy way to dump out a Tree::Simple heirarchy, this module
does an excellent job (and plenty more as well).
I have also recently stumbled upon some packaged distributions of
Tree::Simple for the various Unix flavors. Here are some links:
FreeBSD Port - http://www.freshports.org/devel/p5-Tree-Simple/
<http://www.freshports.org/devel/p5-Tree-Simple/>
Debian Package -
http://packages.debian.org/unstable/perl/libtree-simple-perl
<http://packages.debian.org/unstable/perl/libtree-simple-perl>
Linux RPM - <http://rpmpan.sourceforge.net/Tree.html>
OTHER TREE MODULES
There are a few other Tree modules out there, here is a quick
comparison between Tree::Simple and them. Obviously I am biased, so
take what I say with a grain of salt, and keep in mind, I wrote
Tree::Simple because I could not find a Tree module that suited my
needs. If Tree::Simple does not fit your needs, I recommend looking at
these modules. Please note that I am only listing Tree::* modules I am
familiar with here, if you think I have missed a module, please let me
know. I have also seen a few tree-ish modules outside of the Tree::*
namespace, but most of them are part of another distribution
(HTML::Tree, Pod::Tree, etc) and are likely specialized in purpose.
Tree::DAG_Node
This module seems pretty stable and very robust with a lot of
functionality. However, Tree::DAG_Node does not come with any
automated tests. It's test.pl file simply checks the module loads
and nothing else. While I am sure the author tested his code, I
would feel better if I was able to see that. The module is approx.
3000 lines with POD, and 1,500 without the POD. The shear depth and
detail of the documentation and the ratio of code to documentation
is impressive, and not to be taken lightly. But given that it is a
well known fact that the likeliness of bugs increases along side
the size of the code, I do not feel comfortable with large modules
like this which have no tests.
All this said, I am not a huge fan of the API either, I prefer the
gender neutral approach in Tree::Simple to the mother/daughter
style of Tree::DAG_Node. I also feel very strongly that
Tree::DAG_Node is trying to do much more than makes sense in a
single module, and is offering too many ways to do the same or
similar things.
However, of all the Tree::* modules out there, Tree::DAG_Node seems
to be one of the favorites, so it may be worth investigating.
Tree::MultiNode
I am not very familiar with this module, however, I have heard some
good reviews of it, so I thought it deserved mention here. I
believe it is based upon C++ code found in the book Algorithms in
C++ by Robert Sedgwick. It uses a number of interesting ideas,
such as a ::Handle object to traverse the tree with (similar to
Visitors, but also seem to be to be kind of like a cursor).
However, like Tree::DAG_Node, it is somewhat lacking in tests and
has only 6 tests in its suite. It also has one glaring bug, which
is that there is currently no way to remove a child node.
Tree::Nary
It is a (somewhat) direct translation of the N-ary tree from the
GLIB library, and the API is based on that. GLIB is a C library,
which means this is a very C-ish API. That doesn't appeal to me, it
might to you, to each their own.
This module is similar in intent to Tree::Simple. It implements a
tree with n branches and has polymorphic node containers. It
implements much of the same methods as Tree::Simple and a few
others on top of that, but being based on a C library, is not very
OO. In most of the method calls the $self argument is not used and
the second argument $node is. Tree::Simple is a much more OO
module than Tree::Nary, so while they are similar in functionality
they greatly differ in implementation style.
Tree
This module is pretty old, it has not been updated since Oct. 31,
1999 and is still on version 0.01. It also seems to be (from the
limited documentation) a binary and a balanced binary tree,
Tree::Simple is an n-ary tree, and makes no attempt to balance
anything.
Tree::Ternary
This module is older than Tree, last update was Sept. 24th, 1999.
It seems to be a special purpose tree, for storing and accessing
strings, not general purpose like Tree::Simple.
Tree::Ternary_XS
This module is an XS implementation of the above tree type.
Tree::Trie
This too is a specialized tree type, it sounds similar to the
Tree::Ternary, but it much newer (latest release in 2003). It seems
specialized for the lookup and retrieval of information like a
hash.
Tree::M
Is a wrapper for a C++ library, whereas Tree::Simple is pure-perl.
It also seems to be a more specialized implementation of a tree,
therefore not really the same as Tree::Simple.
Tree::Fat
Is a wrapper around a C library, again Tree::Simple is pure-perl.
The author describes FAT-trees as a combination of a Tree and an
array. It looks like a pretty mean and lean module, and good if you
need speed and are implementing a custom data-store of some kind.
The author points out too that the module is designed for embedding
and there is not default embedding, so you can't really use it "out
of the box".
ACKNOWLEDGEMENTS
Thanks to Nadim Ibn Hamouda El Khemir for making Data::TreeDumper work
with Tree::Simple.
Thanks to Brett Nuske for his idea for the "getUID" and "setUID"
methods.
Thanks to whomever submitted the memory leak bug to RT (#7512).
Thanks to Mark Thomas for his insight into how to best handle the
height and width properties without unessecary recursion.
Thanks for Mark Lawrence for the &traverse post-func patch, tests and
docs.
AUTHOR
Stevan Little, <stevan@iinteractive.com>
Rob Kinyon, <rob@iinteractive.com>
COPYRIGHT AND LICENSE
Copyright 2004-2006 by Infinity Interactive, Inc.
<http://www.iinteractive.com>
This library is free software; you can redistribute it and/or modify it
under the same terms as Perl itself.
perl v5.14.1 2007-11-11 Tree::Simple(3)