Dancer::Deployment(3) User Contributed Perl DocumentationDancer::Deployment(3)NAMEDancer::Deployment - common ways to put your Dancer app into use
DESCRIPTION
Dancer has been designed to be flexible, and this flexibility extends
to your choices when deploying your Dancer app.
Running as a cgi-script (or fast-cgi)
In providing ultimate flexibility in terms of deployment, your Dancer
app can be run as a simple cgi-script out-of-the-box. No additional
web-server configuration needed. Your web server should recognize .cgi
files and be able to serve Perl scripts. The Perl module Plack::Runner
is required.
Start by adding the following to your apache configuration (httpd.conf
or sites-available/*site*):
<VirtualHost *:80>
ServerName www.example.com
DocumentRoot /srv/www.example.com/public
ServerAdmin you@example.com
<Directory "/srv/www.example.com/public">
AllowOverride None
Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
Order allow,deny
Allow from all
AddHandler cgi-script .cgi
</Directory>
RewriteEngine On
RewriteCond %{REQUEST_FILENAME} !-f
RewriteRule ^(.*)$ /dispatch.fcgi$1 [QSA,L]
ErrorLog /var/log/apache2/www.example.com-error.log
CustomLog /var/log/apache2/www.example.com-access_log common
</VirtualHost>
Here, the mod_rewrite magic for Pretty-URLs is directly put in Apache's
configuration. But if your web server supports .htaccess files, you
can drop those lines in a .htaccess file.
To check if your server supports mod_rewrite type "apache2 -l" to list
modules. To enable mod_rewrite (Debian), run "a2enmod rewrite". Place
following code in a file called .htaccess in your application's root
folder:
# BEGIN dancer application htaccess
RewriteEngine On
RewriteCond %{SCRIPT_FILENAME} !-d
RewriteCond %{SCRIPT_FILENAME} !-f
RewriteRule (.*) /dispatch.cgi$1 [L]
# END dancer application htaccess
Now you can access your dancer application URLs as if you were using
the embedded web server.
http://localhost/
This option is a no-brainer, easy to setup, low maintenance but serves
requests slower than all other options.
You can use the same technique to deploy with FastCGI, by just changing
the line:
AddHandler cgi-script .cgi
By:
AddHandler fastcgi-script .fcgi
Of course remember to update your rewrite rules, if you have set any:
RewriteRule (.*) /dispatch.fcgi$1 [L]
Running stand-alone
At the simplest, your Dancer app can run standalone, operating as its
own webserver using HTTP::Simple::PSGI.
Simply fire up your app:
$ perl bin/app.pl
>> Listening on 0.0.0.0:3000
== Entering the dance floor ...
Point your browser at it, and away you go!
This option can be useful for small personal web apps or internal apps,
but if you want to make your app available to the world, it probably
won't suit you.
Running on Perl webservers with plackup
A number of Perl web servers supporting PSGI are available on cpan:
Starman
"Starman" is a high performance web server, with support for
preforking, signals, ...
Twiggy
"Twiggy" is an "AnyEvent" web server, it's light and fast.
Corona
"Corona" is a "Coro" based web server.
To start your application, just run plackup (see Plack and specific
servers above for all available options):
$ plackup bin/app.pl
$ plackup -E deployment -s Starman --workers=10 -p 5001 -a bin/app.pl
As you can see, the scaffolded Perl script for your app can be used as
a PSGI startup file.
Enabling content compression
Content compression (gzip, deflate) can be easily enabled via a Plack
middleware (see Plack#Plack::Middleware): Plack::Middleware::Deflater.
It's a middleware to encode the response body in gzip or deflate, based
on Accept-Encoding HTTP request header.
Enable it as you would enable any Plack middleware. First you need to
install Plack::Middleware::Deflater, then in the configuration file
(usually environments/development.yml), add these lines:
plack_middlewares:
-
- Plack::Middleware::Deflater
- ...
These lines tell Dancer to add Plack::Middleware::Deflater to the list
of middlewares to pass to Plack::Builder, when wrapping the Dancer app.
The syntax is :
· as key: the name of the Plack middleware to use
· as value: the options to pass it as a list. In our case, there is
no option to specify to Plack::Middleware::Deflater, so we use an
empty YAML list.
To test if content compression works, trace the HTTP request and
response before and after enabling this middleware. Among other things,
you should notice that the response is gzip or deflate encoded, and
contains a header "Content-Encoding" set to "gzip" or "deflate"
Running multiple apps with Plack::Builder
You can use Plack::Builder to mount multiple Dancer applications on a
PSGI webserver like Starman.
Start by creating a simple app.psgi file:
use Dancer ':syntax';
use Plack::Builder;
setting apphandler => 'PSGI';
my $app1 = sub {
my $env = shift;
local $ENV{DANCER_APPDIR} = '/Users/franck/tmp/app1';
setting appdir => '/Users/franck/tmp/app1';
load_app "app1";
Dancer::App->set_running_app('app1');
Dancer::Config->load;
my $request = Dancer::Request->new( env => $env );
Dancer->dance($request);
};
my $app2 = sub {
my $env = shift;
local $ENV{DANCER_APPDIR} = '/Users/franck/tmp/app2';
setting appdir => '/Users/franck/tmp/app2';
load_app "app2";
Dancer::App->set_running_app('app2');
Dancer::Config->load;
my $request = Dancer::Request->new( env => $env );
Dancer->dance($request);
};
builder {
mount "/app1" => builder {$app1};
mount "/app2" => builder {$app2};
};
and now use Starman
plackup -a app.psgi -s Starman
Using daemontools to create a service
daemontools is a collection of tools for managing UNIX services. You
can use it to easily start/restart/stop services.
A basic script to start an application: (in /service/application/run)
#!/bin/sh
# if your application is not installed in @INC path:
export PERL5LIB='/path/to/your/application/lib'
exec 2>&1 \
/usr/local/bin/plackup -s Starman -a /path/to/your/application/app.pl -p 5000
Running stand-alone behind a proxy / load balancer
Another option would be to run your app stand-alone as described above,
but then use a proxy or load balancer to accept incoming requests (on
the standard port 80, say) and feed them to your Dancer app.
This could be achieved using various software; examples would include:
Using Apache's mod_proxy
You could set up a VirtualHost for your web app, and proxy all requests
through to it:
<VirtualHost mywebapp.example.com:80>
ProxyPass / http://localhost:3000/
ProxyPassReverse / http://localhost:3000/
</VirtualHost>
Or, if you want your webapp to share an existing VirtualHost, you could
have it under a specified dir:
ProxyPass /mywebapp/ http://localhost:3000/
ProxyPassReverse /mywebapp/ http://localhost:3000/
It is important for you to note that the Apache2 modules mod_proxy and
mod_proxy_http must be enabled.
a2enmod proxy
a2enmod proxy_http
It is also important to set permissions for proxying for security
purposes, below is an example.
<Proxy *>
Order allow,deny
Allow from all
</Proxy>
Using perlbal
"perlbal" is a single-threaded event-based server written in Perl
supporting HTTP load balancing, web serving, and a mix of the two,
available from <http://www.danga.com/perlbal/>
It processes hundreds of millions of requests a day just for
LiveJournal, Vox and TypePad and dozens of other "Web 2.0"
applications.
It can also provide a management interface to let you see various
information on requests handled etc.
It could easily be used to handle requests for your Dancer apps, too.
It can be easily installed from CPAN:
perl -MCPAN -e 'install Perlbal'
Once installed, you'll need to write a configuration file. See the
examples provided with perlbal, but you'll probably want something
like:
CREATE POOL my_dancers
POOL my_dancers ADD 10.0.0.10:3030
POOL my_dancers ADD 10.0.0.11:3030
POOL my_dancers ADD 10.0.0.12:3030
POOL my_dancers ADD 10.0.0.13:3030
CREATE SERVICE my_webapp
SET listen = 0.0.0.0:80
SET role = reverse_proxy
SET pool = my_dancers
SET persist_client = on
SET persist_backend = on
SET verify_backend = on
ENABLE balancer
Using balance
"balance" is a simple load-balancer from Inlab Software, available from
<http://www.inlab.de/balance.html>.
It could be used simply to hand requests to a standalone Dancer app.
You could even run several instances of your Dancer app, on the same
machine or on several machines, and use a machine running balance to
distribute the requests between them, for some serious heavy traffic
handling!
To listen on port 80, and send requests to a Dancer app on port 3000:
balance http localhost:3000
To listen on a specified IP only on port 80, and distribute requests
between multiple Dancer apps on multiple other machines:
balance -b 10.0.0.1 80 10.0.0.2:3000 10.0.0.3:3000 10.0.0.4:3000
Using Lighttpd
You can use Lighttp's mod_proxy:
$HTTP["url"] =~ "/application" {
proxy.server = (
"/" => (
"application" => ( "host" => "127.0.0.1", "port" => 3000 )
)
)
}
This configuration will proxy all request to the /application path to
the path / on localhost:3000.
Using Nginx
with Nginx:
upstream backendurl {
server unix:THE_PATH_OF_YOUR_PLACKUP_SOCKET_HERE.sock;
}
server {
listen 80;
server_name YOUR_HOST_HERE;
access_log /var/log/YOUR_ACCESS_LOG_HERE.log;
error_log /var/log/YOUR_ERROR_LOG_HERE.log info;
root YOUR_ROOT_PROJECT/public;
location / {
try_files $uri @proxy;
access_log off;
expires max;
}
location @proxy {
proxy_set_header Host $http_host;
proxy_set_header X-Forwarded-Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_pass http://backendurl;
}
}
You will need plackup to start a worker listening on a socket :
cd YOUR_PROJECT_PATH
sudo -u www plackup -E production -s Starman --workers=2 -l THE_PATH_OF_YOUR_PLACKUP_SOCKET_HERE.sock -a bin/app.pl
A good way to start this is to use "daemontools" and place this line
with all environments variables in the "run" file.
Running from Apache
You can run your Dancer app from Apache using the following examples:
Running from Apache with Plack
You can run your app from Apache using PSGI (Plack), with a config like
the following:
<VirtualHost myapp.example.com>
ServerName www.myapp.example.com
ServerAlias myapp.example.com
DocumentRoot /websites/myapp.example.com
<Directory /home/myapp/myapp>
AllowOverride None
Order allow,deny
Allow from all
</Directory>
<Location />
SetHandler perl-script
PerlHandler Plack::Handler::Apache2
PerlSetVar psgi_app /websites/myapp.example.com/app.pl
</Location>
ErrorLog /websites/myapp.example.com/logs/error_log
CustomLog /websites/myapp.example.com/logs/access_log common
</VirtualHost>
To set the environment you want to use for your application (production
or development), you can set it this way:
<VirtualHost>
...
SetEnv DANCER_ENVIRONMENT "production"
...
</VirtualHost>
Running from Apache under appdir
If you want to deploy multiple applications under the same VirtualHost,
using one application per directory for example, you can do the
following.
This example uses the FastCGI dispatcher that comes with Dancer, but
you should be able to adapt this to use any other way of deployment
described in this guide. The only purpose of this example is to show
how to deploy multiple applications under the same base
directory/virtualhost.
<VirtualHost *:80>
ServerName localhost
DocumentRoot "/path/to/rootdir"
RewriteEngine On
RewriteCond %{REQUEST_FILENAME} !-f
<Directory "/path/to/rootdir">
AllowOverride None
Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
Order allow,deny
Allow from all
AddHandler fastcgi-script .fcgi
</Directory>
RewriteRule /App1(.*)$ /App1/public/dispatch.fcgi$1 [QSA,L]
RewriteRule /App2(.*)$ /App2/public/dispatch.fcgi$1 [QSA,L]
...
RewriteRule /AppN(.*)$ /AppN/public/dispatch.fcgi$1 [QSA,L]
</VirtualHost>
Of course, if your Apache configuration allows that, you can put the
RewriteRules in a .htaccess file directly within the application's
directory, which lets you add a new application without changing the
Apache configuration.
Running on lighttpd (CGI)
To run as a CGI app on lighttpd, just create a soft link to the
dispatch.cgi script (created when you run dancer -a MyApp) inside your
system's cgi-bin folder. Make sure mod_cgi is enabled.
ln -s /path/to/MyApp/public/dispatch.cgi /usr/lib/cgi-bin/mycoolapp.cgi
Running on lighttpd (FastCGI)
Make sure mod_fcgi is enabled. You also must have FCGI installed.
This example configuration uses TCP/IP:
$HTTP["url"] == "^/app" {
fastcgi.server += (
"/app" => (
"" => (
"host" => "127.0.0.1",
"port" => "5000",
"check-local" => "disable",
)
)
)
}
Launch your application:
plackup -s FCGI --port 8080 bin/app.pl
This example configuration uses a socket:
$HTTP["url"] =~ "^/app" {
fastcgi.server += (
"/app" => (
"" => (
"socket" => "/tmp/fcgi.sock",
"check-local" => "disable",
)
)
)
}
Launch your application:
plackup -s FCGI --listen /tmp/fcgi.sock bin/app.pl
perl v5.14.1 2011-07-26 Dancer::Deployment(3)