USB_EP_ENABLE(9) Kernel Mode Gadget API USB_EP_ENABLE(9)NAMEusb_ep_enable - configure endpoint, making it usable
SYNOPSIS
int usb_ep_enable(struct usb_ep * ep);
ARGUMENTS
ep
the endpoint being configured. may not be the endpoint named “ep0”.
drivers discover endpoints through the ep_list of a usb_gadget.
DESCRIPTION
When configurations are set, or when interface settings change, the
driver will enable or disable the relevant endpoints. while it is
enabled, an endpoint may be used for i/o until the driver receives a
disconnect from the host or until the endpoint is disabled.
the ep0 implementation (which calls this routine) must ensure that the
hardware capabilities of each endpoint match the descriptor provided
for it. for example, an endpoint named “ep2in-bulk” would be usable for
interrupt transfers as well as bulk, but it likely couldn't be used for
iso transfers or for endpoint 14. some endpoints are fully
configurable, with more generic names like “ep-a”. (remember that for
USB, “in” means “towards the USB master”.)
returns zero, or a negative error code.
AUTHOR
David Brownell <dbrownell@users.sourceforge.net>
Author.
COPYRIGHTKernel Hackers Manual 3.11 November 2013 USB_EP_ENABLE(9)