radiobutton(n) Tk Built-In Commands radiobutton(n)______________________________________________________________________________NAMEradiobutton - Create and manipulate radiobutton widgets
SYNOPSISradiobutton pathName ?options?
STANDARD OPTIONS-activebackground-disabledforeground-padx
-activeforeground-font-pady
-anchor-foreground-relief
-background-highlightbackground -takefocus
-bitmap-highlightcolor-text
-borderwidth-highlightthickness-textvariable
-compound-image-underline
-cursor-justify-wraplength
See the options manual entry for details on the standard options.
WIDGET-SPECIFIC OPTIONS
[-command command] Specifies a Tcl command to associate with the but‐
ton. This command is typically invoked when mouse button 1 is released
over the button window. The button's global variable (-variable
option) will be updated before the command is invoked.
[-height height] Specifies a desired height for the button. If an
image or bitmap is being displayed in the button then the value is in
screen units (i.e. any of the forms acceptable to Tk_GetPixels); for
text it is in lines of text. If this option is not specified, the but‐
ton's desired height is computed from the size of the image or bitmap
or text being displayed in it. [-indicatoron indicatorOn] Specifies
whether or not the indicator should be drawn. Must be a proper boolean
value. If false, the -relief option is ignored and the widget's relief
is always sunken if the widget is selected and raised otherwise.
[-selectcolor selectColor] Specifies a background color to use when the
button is selected. If -indicatoron is true then the color applies to
the indicator. Under Windows, this color is used as the background for
the indicator regardless of the select state. If -indicatoron is
false, this color is used as the background for the entire widget, in
place of -background or -activeBackground, whenever the widget is
selected. If specified as an empty string then no special color is
used for displaying when the widget is selected. [-offrelief offRe‐
lief] Specifies the relief for the checkbutton when the indicator is
not drawn and the checkbutton is off. The default value is “raised”.
By setting this option to “flat” and setting -indicatoron to false and
-overrelief to “raised”, the effect is achieved of having a flat button
that raises on mouse-over and which is depressed when activated. This
is the behavior typically exhibited by the Align-Left, Align-Right, and
Center radiobuttons on the toolbar of a word-processor, for example.
[-overrelief overRelief] Specifies an alternative relief for the
radiobutton, to be used when the mouse cursor is over the widget. This
option can be used to make toolbar buttons, by configuring -relief flat
-overrelief raised. If the value of this option is the empty string,
then no alternative relief is used when the mouse cursor is over the
radiobutton. The empty string is the default value. [-selectim‐
age selectImage] Specifies an image to display (in place of the -image
option) when the radiobutton is selected. This option is ignored
unless the -image option has been specified. [-state state] Specifies
one of three states for the radiobutton: normal, active, or disabled.
In normal state the radiobutton is displayed using the -foreground and
-background options. The active state is typically used when the
pointer is over the radiobutton. In active state the radiobutton is
displayed using the -activeforeground and -activebackground options.
Disabled state means that the radiobutton should be insensitive: the
default bindings will refuse to activate the widget and will ignore
mouse button presses. In this state the -disabledforeground and -back‐
ground options determine how the radiobutton is displayed. [-tris‐
tateimage tristateImage] Specifies an image to display (in place of the
-image option) when the radiobutton is selected. This option is
ignored unless the -image option has been specified. [-tristate‐
value tristateValue] Specifies the value that causes the radiobutton to
display the multi-value selection, also known as the tri-state mode.
Defaults to “”. [-value value] Specifies value to store in the but‐
ton's associated variable whenever this button is selected. [-vari‐
able variable] Specifies the name of a global variable to set whenever
this button is selected. Changes in this variable also cause the but‐
ton to select or deselect itself. Defaults to the value selectedBut‐
ton. [-width width] Specifies a desired width for the button. If an
image or bitmap is being displayed in the button, the value is in
screen units (i.e. any of the forms acceptable to Tk_GetPixels); for
text it is in characters. If this option is not specified, the but‐
ton's desired width is computed from the size of the image or bitmap or
text being displayed in it.
_________________________________________________________________DESCRIPTION
The radiobutton command creates a new window (given by the pathName
argument) and makes it into a radiobutton widget. Additional options,
described above, may be specified on the command line or in the option
database to configure aspects of the radiobutton such as its colors,
font, text, and initial relief. The radiobutton command returns its
pathName argument. At the time this command is invoked, there must not
exist a window named pathName, but pathName's parent must exist.
A radiobutton is a widget that displays a textual string, bitmap or
image and a diamond or circle called an indicator. If text is dis‐
played, it must all be in a single font, but it can occupy multiple
lines on the screen (if it contains newlines or if wrapping occurs
because of the -wraplength option) and one of the characters may
optionally be underlined using the -underline option. A radiobutton
has all of the behavior of a simple button: it can display itself in
either of three different ways, according to the -state option; it can
be made to appear raised, sunken, or flat; it can be made to flash; and
it invokes a Tcl command whenever mouse button 1 is clicked over the
check button.
In addition, radiobuttons can be selected. If a radiobutton is
selected, the indicator is normally drawn with a selected appearance,
and a Tcl variable associated with the radiobutton is set to a particu‐
lar value (normally 1). Under Unix, the indicator is drawn with a
sunken relief and a special color. Under Windows, the indicator is
drawn with a round mark inside. If the radiobutton is not selected,
then the indicator is drawn with a deselected appearance, and the asso‐
ciated variable is set to a different value (typically 0). The indica‐
tor is drawn without a round mark inside. Typically, several radiobut‐
tons share a single variable and the value of the variable indicates
which radiobutton is to be selected. When a radiobutton is selected it
sets the value of the variable to indicate that fact; each radiobutton
also monitors the value of the variable and automatically selects and
deselects itself when the variable's value changes. If the variable's
value matches the -tristatevalue, then the radiobutton is drawn using
the tri-state mode. This mode is used to indicate mixed or multiple
values. (This is used when the radiobutton represents the state of
multiple items.) By default the variable selectedButton is used; its
contents give the name of the button that is selected, or the empty
string if no button associated with that variable is selected. The
name of the variable for a radiobutton, plus the variable to be stored
into it, may be modified with options on the command line or in the
option database. Configuration options may also be used to modify the
way the indicator is displayed (or whether it is displayed at all). By
default a radiobutton is configured to select itself on button clicks.
WIDGET COMMAND
The radiobutton command creates a new Tcl command whose name is path‐
Name. This command may be used to invoke various operations on the
widget. It has the following general form:
pathName option ?arg arg ...?
Option and the args determine the exact behavior of the command. The
following commands are possible for radiobutton widgets:
pathName cget option
Returns the current value of the configuration option given by
option. Option may have any of the values accepted by the
radiobutton command.
pathName configure ?option? ?value option value ...?
Query or modify the configuration options of the widget. If no
option is specified, returns a list describing all of the avail‐
able options for pathName (see Tk_ConfigureInfo for information
on the format of this list). If option is specified with no
value, the command returns a list describing the one named
option (this list will be identical to the corresponding sublist
of the value returned if no option is specified). If one or
more option-value pairs are specified, the command modifies the
given widget option(s) to have the given value(s); in this case
the command returns an empty string. Option may have any of the
values accepted by the radiobutton command.
pathName deselect
Deselects the radiobutton and sets the associated variable to an
empty string. If this radiobutton was not currently selected,
the command has no effect.
pathName flash
Flashes the radiobutton. This is accomplished by redisplaying
the radiobutton several times, alternating between active and
normal colors. At the end of the flash the radiobutton is left
in the same normal/active state as when the command was invoked.
This command is ignored if the radiobutton's state is disabled.
pathName invoke
Does just what would have happened if the user invoked the
radiobutton with the mouse: selects the button and invokes its
associated Tcl command, if there is one. The return value is
the return value from the Tcl command, or an empty string if
there is no command associated with the radiobutton. This com‐
mand is ignored if the radiobutton's state is disabled.
pathName select
Selects the radiobutton and sets the associated variable to the
value corresponding to this widget.
BINDINGS
Tk automatically creates class bindings for radiobuttons that give them
the following default behavior:
[1] On Unix systems, a radiobutton activates whenever the mouse
passes over it and deactivates whenever the mouse leaves the
radiobutton. On Mac and Windows systems, when mouse button 1 is
pressed over a radiobutton, the button activates whenever the
mouse pointer is inside the button, and deactivates whenever the
mouse pointer leaves the button.
[2] When mouse button 1 is pressed over a radiobutton it is invoked
(it becomes selected and the command associated with the button
is invoked, if there is one).
[3] When a radiobutton has the input focus, the space key causes the
radiobutton to be invoked.
If the radiobutton's state is disabled then none of the above actions
occur: the radiobutton is completely non-responsive.
The behavior of radiobuttons can be changed by defining new bindings
for individual widgets or by redefining the class bindings.
SEE ALSOcheckbutton(n), labelframe(n), listbox(n), options(n), scale(n),
ttk::radiobutton(n)KEYWORDS
radiobutton, widget
Tk 4.4 radiobutton(n)