checkbutton(n) Tk Built-In Commands checkbutton(n)______________________________________________________________________________NAMEcheckbutton - Create and manipulate checkbutton widgets
SYNOPSIScheckbutton pathName ?options?
STANDARD OPTIONS-activebackground-disabledforeground-padx
-activeforeground-font-pady
-anchor-foreground-relief
-background-highlightbackground -takefocus
-bitmap-highlightcolor-text
-borderwidth-highlightthickness-textvariable
-compound-image-underline
-cursor-justify-wraplength
See the options manual entry for details on the standard options.
WIDGET-SPECIFIC OPTIONS
Command-Line Name:-command
Database Name: command
Database Class: Command
Specifies a Tcl command to associate with the button. This com-
mand is typically invoked when mouse button 1 is released over
the button window. The button's global variable (-variable
option) will be updated before the command is invoked.
Command-Line Name:-height
Database Name: height
Database Class: Height
Specifies a desired height for the button. If an image or bit-
map is being displayed in the button then the value is in screen
units (i.e. any of the forms acceptable to Tk_GetPixels); for
text it is in lines of text. If this option isn't specified,
the button's desired height is computed from the size of the
image or bitmap or text being displayed in it.
Command-Line Name:-indicatoron
Database Name: indicatorOn
Database Class: IndicatorOn
Specifies whether or not the indicator should be drawn. Must be
a proper boolean value. If false, the relief option is ignored
and the widget's relief is always sunken if the widget is
selected and raised otherwise. |
Command-Line Name:-offrelief |
Database Name: offRelief |
Database Class: OffRelief |
Specifies the relief for the checkbutton when the indicator is |
not drawn and the checkbutton is off. The default value is |
"raised". By setting this option to "flat" and setting -indica- |
toron to false and -overrelief to raised, the effect is achieved |
of having a flat button that raises on mouse-over and which is |
depressed when activated. This is the behavior typically exhib- |
ited by the Bold, Italic, and Underline checkbuttons on the |
toolbar of a word-processor, for example.
Command-Line Name:-offvalue
Database Name: offValue
Database Class: Value
Specifies value to store in the button's associated variable
whenever this button is deselected. Defaults to ``0''.
Command-Line Name:-onvalue
Database Name: onValue
Database Class: Value
Specifies value to store in the button's associated variable
whenever this button is selected. Defaults to ``1''. |
Command-Line Name:-overrelief |
Database Name: overRelief |
Database Class: OverRelief |
Specifies an alternative relief for the checkbutton, to be used |
when the mouse cursor is over the widget. This option can be |
used to make toolbar buttons, by configuring -relief flat -over- |
relief raised. If the value of this option is the empty string, |
then no alternative relief is used when the mouse cursor is over |
the checkbutton. The empty string is the default value.
Command-Line Name:-selectcolor
Database Name: selectColor
Database Class: Background
Specifies a background color to use when the button is selected.
If indicatorOn is true then the color applies to the indicator.
Under Windows, this color is used as the background for the
indicator regardless of the select state. If indicatorOn is
false, this color is used as the background for the entire wid-
get, in place of background or activeBackground, whenever the
widget is selected. If specified as an empty string then no
special color is used for displaying when the widget is
selected.
Command-Line Name:-selectimage
Database Name: selectImage
Database Class: SelectImage
Specifies an image to display (in place of the image option)
when the checkbutton is selected. This option is ignored unless
the image option has been specified.
Command-Line Name:-state
Database Name: state
Database Class: State
Specifies one of three states for the checkbutton: normal,
active, or disabled. In normal state the checkbutton is dis-
played using the foreground and background options. The active
state is typically used when the pointer is over the checkbut-
ton. In active state the checkbutton is displayed using the
activeForeground and activeBackground options. Disabled state
means that the checkbutton should be insensitive: the default
bindings will refuse to activate the widget and will ignore
mouse button presses. In this state the disabledForeground and
background options determine how the checkbutton is displayed.
Command-Line Name:-variable
Database Name: variable
Database Class: Variable
Specifies name of global variable to set to indicate whether or
not this button is selected. Defaults to the name of the button
within its parent (i.e. the last element of the button window's
path name).
Command-Line Name:-width
Database Name: width
Database Class: Width
Specifies a desired width for the button. If an image or bitmap
is being displayed in the button then the value is in screen
units (i.e. any of the forms acceptable to Tk_GetPixels); for
text it is in characters. If this option isn't specified, the
button's desired width is computed from the size of the image or
bitmap or text being displayed in it.
_________________________________________________________________DESCRIPTION
The checkbutton command creates a new window (given by the pathName
argument) and makes it into a checkbutton widget. Additional options,
described above, may be specified on the command line or in the option
database to configure aspects of the checkbutton such as its colors,
font, text, and initial relief. The checkbutton command returns its
pathName argument. At the time this command is invoked, there must not
exist a window named pathName, but pathName's parent must exist.
A checkbutton is a widget that displays a textual string, bitmap or
image and a square called an indicator. If text is displayed, it must
all be in a single font, but it can occupy multiple lines on the screen
(if it contains newlines or if wrapping occurs because of the
wrapLength option) and one of the characters may optionally be under-
lined using the underline option. A checkbutton has all of the behav-
ior of a simple button, including the following: it can display itself
in either of three different ways, according to the state option; it
can be made to appear raised, sunken, or flat; it can be made to flash;
and it invokes a Tcl command whenever mouse button 1 is clicked over
the checkbutton.
In addition, checkbuttons can be selected. If a checkbutton is
selected then the indicator is normally drawn with a selected appear- |
ance, and a Tcl variable associated with the checkbutton is set to a |
particular value (normally 1). Under Unix, the indicator is drawn with |
a sunken relief and a special color. Under Windows, the indicator is |
drawn with a check mark inside. If the checkbutton is not selected, |
then the indicator is drawn with a deselected appearance, and the asso- |
ciated variable is set to a different value (typically 0). Under Unix, |
the indicator is drawn with a raised relief and no special color. |
Under Windows, the indicator is drawn without a check mark inside. By
default, the name of the variable associated with a checkbutton is the
same as the name used to create the checkbutton. The variable name,
and the ``on'' and ``off'' values stored in it, may be modified with
options on the command line or in the option database. Configuration
options may also be used to modify the way the indicator is displayed
(or whether it is displayed at all). By default a checkbutton is con-
figured to select and deselect itself on alternate button clicks. In
addition, each checkbutton monitors its associated variable and auto-
matically selects and deselects itself when the variables value changes
to and from the button's ``on'' value.
WIDGET COMMAND
The checkbutton command creates a new Tcl command whose name is path-
Name. This command may be used to invoke various operations on the
widget. It has the following general form:
pathName option ?arg arg ...?
Option and the args determine the exact behavior of the command. The
following commands are possible for checkbutton widgets:
pathName cget option
Returns the current value of the configuration option given by
option. Option may have any of the values accepted by the
checkbutton command.
pathName configure ?option? ?value option value ...?
Query or modify the configuration options of the widget. If no
option is specified, returns a list describing all of the avail-
able options for pathName (see Tk_ConfigureInfo for information
on the format of this list). If option is specified with no
value, then the command returns a list describing the one named
option (this list will be identical to the corresponding sublist
of the value returned if no option is specified). If one or
more option-value pairs are specified, then the command modifies
the given widget option(s) to have the given value(s); in this
case the command returns an empty string. Option may have any
of the values accepted by the checkbutton command.
pathName deselect
Deselects the checkbutton and sets the associated variable to
its ``off'' value.
pathName flash
Flashes the checkbutton. This is accomplished by redisplaying
the checkbutton several times, alternating between active and
normal colors. At the end of the flash the checkbutton is left
in the same normal/active state as when the command was invoked.
This command is ignored if the checkbutton's state is disabled.
pathName invoke
Does just what would have happened if the user invoked the
checkbutton with the mouse: toggle the selection state of the
button and invoke the Tcl command associated with the checkbut-
ton, if there is one. The return value is the return value from
the Tcl command, or an empty string if there is no command asso-
ciated with the checkbutton. This command is ignored if the
checkbutton's state is disabled.
pathName select
Selects the checkbutton and sets the associated variable to its
``on'' value.
pathName toggle
Toggles the selection state of the button, redisplaying it and
modifying its associated variable to reflect the new state.
BINDINGS
Tk automatically creates class bindings for checkbuttons that give them
the following default behavior: |
[1] ||
On Unix systems, a checkbutton activates whenever the mouse |
passes over it and deactivates whenever the mouse leaves the |
checkbutton. On Mac and Windows systems, when mouse button 1 is |
pressed over a checkbutton, the button activates whenever the |
mouse pointer is inside the button, and deactivates whenever the |
mouse pointer leaves the button.
[2] When mouse button 1 is pressed over a checkbutton, it is invoked
(its selection state toggles and the command associated with the
button is invoked, if there is one). |
[3] ||
When a checkbutton has the input focus, the space key causes the |
checkbutton to be invoked. Under Windows, there are additional |
key bindings; plus (+) and equal (=) select the button, and |
minus (-) deselects the button.
If the checkbutton's state is disabled then none of the above actions
occur: the checkbutton is completely non-responsive.
The behavior of checkbuttons can be changed by defining new bindings
for individual widgets or by redefining the class bindings.
SEE ALSObutton(n), options(n), radiobutton(n)KEYWORDS
checkbutton, widget
Tk 4.4 checkbutton(n)
