audiots(7D) Devices audiots(7D)NAMEaudiots - Acer Laboratories Inc. M5451 audio processor interface
DESCRIPTION
The audiots device uses the ALI M5451 audio processor and an AC-97
Codec to implement the audio device interface.
The audiots device provides support for the internal speaker, head‐
phone, line out, line in, and microphone.
FILES
/kernel/drv/sparcv9/audiots
64-bit audiots driver
/kernel/drv/audiots.conf
audiots driver configuration file
ATTRIBUTES
See attributes(5) for a descriptions of the following attributes:
┌────────────────────┬───────────────────────────────────────┐
│ ATTRIBUTE TYPE │ ATTRIBUTE VALUE │
├────────────────────┼───────────────────────────────────────┤
│Architecture │ SPARC │
├────────────────────┼───────────────────────────────────────┤
│Availability │ driver/audio │
├────────────────────┼───────────────────────────────────────┤
│Interface Stability │ Uncommitted │
└────────────────────┴───────────────────────────────────────┘
SEE ALSOioctl(2), attributes(5), audio(7I), mixer(7I), streamio(7I)
Acer Laboratories Inc. M5451 PCI Audio Processor Technical Specifica‐
tion
DIAGNOSTICS
In addition to being logged, the following messages can appear on the
system console:
play-interrupts too low The interrupt rate in audiots.conf is set
record-interrupts too low too low. It has been reset to the rate
specified in the message. Update
audiots.conf to a higher interrupt rate.
play-interrupts too high The interrupt rate set in audiots.conf is
record-interrupts too high set too high. It has been reset to the
rate specified in the message. Update
audiots.conf to a lower interrupt rate.
SunOS 5.11 12 May 2009 audiots(7D)