PCAP(3)PCAP(3)NAMEpcap - Packet Capture library
SYNOPSIS
#include <pcap.h>
pcap_t *pcap_open_live(char *device, int snaplen,
int promisc, int to_ms, char *ebuf)
pcap_t *pcap_open_dead(int linktype, int snaplen)
pcap_t *pcap_open_offline(char *fname, char *ebuf)
pcap_dumper_t *pcap_dump_open(pcap_t *p, char *fname)
char errbuf[PCAP_ERRBUF_SIZE];
char *pcap_lookupdev(char *errbuf)
int pcap_lookupnet(char *device, bpf_u_int32 *netp,
bpf_u_int32 *maskp, char *errbuf)
int pcap_dispatch(pcap_t *p, int cnt,
pcap_handler callback, u_char *user)
int pcap_loop(pcap_t *p, int cnt,
pcap_handler callback, u_char *user)
void pcap_dump(u_char *user, struct pcap_pkthdr *h,
u_char *sp)
int pcap_compile(pcap_t *p, struct bpf_program *fp,
char *str, int optimize, bpf_u_int32 netmask)
int pcap_setfilter(pcap_t *p, struct bpf_program *fp)
void pcap_freecode(struct bpf_program *);
u_char *pcap_next(pcap_t *p, struct pcap_pkthdr *h)
int pcap_datalink(pcap_t *p)
int pcap_snapshot(pcap_t *p)
int pcap_is_swapped(pcap_t *p)
int pcap_major_version(pcap_t *p)
int pcap_minor_version(pcap_t *p)
int pcap_stats(pcap_t *p, struct pcap_stat *ps)
FILE *pcap_file(pcap_t *p)
int pcap_fileno(pcap_t *p)
void pcap_perror(pcap_t *p, char *prefix)
char *pcap_geterr(pcap_t *p)
char *pcap_strerror(int error)
void pcap_close(pcap_t *p)
void pcap_dump_close(pcap_dumper_t *p)
DESCRIPTION
The Packet Capture library provides a high level interface to packet
capture systems. All packets on the network, even those destined for
other hosts, are accessible through this mechanism.
ROUTINES
NOTE: errbuf in pcap_open_live(), pcap_open_offline(),
pcap_lookupdev(), and pcap_lookupnet() is assumed to be able to hold at
least PCAP_ERRBUF_SIZE chars.
pcap_open_live() is used to obtain a packet capture descriptor to look
at packets on the network. device is a string that specifies the net‐
work device to open; on Linux systems with 2.2 or later kernels, a
device argument of "any" or NULL can be used to capture packets from
all interfaces. snaplen specifies the maximum number of bytes to cap‐
ture. promisc specifies if the interface is to be put into promiscuous
mode. (Note that even if this parameter is false, the interface could
well be in promiscuous mode for some other reason.) For now, this
doesn't work on the "any" device; if an argument of "any" or NULL is
supplied, the promisc flag is ignored. to_ms specifies the read time‐
out in milliseconds. The read timeout is used to arrange that the read
not necessarily return immediately when a packet is seen, but that it
wait for some amount of time to allow more packets to arrive and to
read multiple packets from the OS kernel in one operation. Not all
platforms support a read timeout; on platforms that don't, the read
timeout is ignored. ebuf is used to return error text and is only set
when pcap_open_live() fails and returns NULL.
pcap_open_dead() is used for creating a pcap_t structure to use when
calling the other functions in libpcap. It is typically used when just
using libpcap for compiling BPF code.
pcap_open_offline() is called to open a ``savefile'' for reading.
fname specifies the name of the file to open. The file has the same
format as those used by tcpdump(1) and tcpslice(1). The name "-" in a
synonym for stdin. ebuf is used to return error text and is only set
when pcap_open_offline() fails and returns NULL.
pcap_dump_open() is called to open a ``savefile'' for writing. The name
"-" in a synonym for stdout. NULL is returned on failure. p is a pcap
struct as returned by pcap_open_offline() or pcap_open_live(). fname
specifies the name of the file to open. If NULL is returned,
pcap_geterr() can be used to get the error text.
pcap_lookupdev() returns a pointer to a network device suitable for use
with pcap_open_live() and pcap_lookupnet(). If there is an error, NULL
is returned and errbuf is filled in with an appropriate error message.
pcap_lookupnet() is used to determine the network number and mask asso‐
ciated with the network device device. Both netp and maskp are
bpf_u_int32 pointers. A return of -1 indicates an error in which case
errbuf is filled in with an appropriate error message.
pcap_dispatch() is used to collect and process packets. cnt specifies
the maximum number of packets to process before returning. This is not
a minimum number; when reading a live capture, only one bufferful of
packets is read at a time, so fewer than cnt packets may be processed.
A cnt of -1 processes all the packets received in one buffer when read‐
ing a live capture, or all the packets in the file when reading a
``savefile''. callback specifies a routine to be called with three
arguments: a u_char pointer which is passed in from pcap_dispatch(), a
pointer to the pcap_pkthdr struct (which precede the actual network
headers and data), and a u_char pointer to the packet data.
The number of packets read is returned. 0 is returned if no packets
were read from a live capture (if, for example, they were discarded
because they didn't pass the packet filter, or if, on platforms that
support a read timeout that starts before any packets arrive, the time‐
out expires before any packets arrive, or if the file descriptor for
the capture device is in non-blocking mode and no packets were avail‐
able to be read) or if no more packets are available in a ``savefile.''
A return of -1 indicates an error in which case pcap_perror() or
pcap_geterr() may be used to display the error text.
NOTE: when reading a live capture, pcap_dispatch() will not necessarily
return when the read times out; on some platforms, the read timeout
isn't supported, and, on other platforms, the timer doesn't start until
at least one packet arrives. This means that the read timeout should
NOT be used in, for example, an interactive application, to allow the
packet capture loop to ``poll'' for user input periodically, as there's
no guarantee that pcap_dispatch() will return after the timeout
expires.
pcap_loop() is similar to pcap_dispatch() except it keeps reading pack‐
ets until cnt packets are processed or an error occurs. It does not
return when live read timeouts occur. Rather, specifying a non-zero
read timeout to pcap_open_live() and then calling pcap_dispatch()
allows the reception and processing of any packets that arrive when the
timeout occurs. A negative cnt causes pcap_loop() to loop forever (or
at least until an error occurs).
pcap_next() returns a u_char pointer to the next packet.
pcap_dump() outputs a packet to the ``savefile'' opened with
pcap_dump_open(). Note that its calling arguments are suitable for use
with pcap_dispatch() or pcap_loop().
pcap_compile() is used to compile the string str into a filter program.
program is a pointer to a bpf_program struct and is filled in by
pcap_compile(). optimize controls whether optimization on the result‐
ing code is performed. netmask specifies the netmask of the local net.
A return of -1 indicates an error in which case pcap_geterr() may be
used to display the error text.
pcap_compile_nopcap() is similar to pcap_compile() except that instead
of passing a pcap structure, one passes the snaplen and linktype
explicitly. It is intended to be used for compiling filters for direct
BPF usage, without necessarily having called pcap_open(). A return of
-1 indicates an error; the error text is unavailable. (pcap_com‐
pile_nopcap() is a wrapper around pcap_open_dead(), pcap_compile(), and
pcap_close(); the latter three routines can be used directly in order
to get the error text for a compilation error.)
pcap_setfilter() is used to specify a filter program. fp is a pointer
to a bpf_program struct, usually the result of a call to pcap_com‐
pile(). -1 is returned on failure, in which case pcap_geterr() may be
used to display the error text; 0 is returned on success.
pcap_freecode() is used to free up allocated memory pointed to by a
bpf_program struct generated by pcap_compile() when that BPF program is
no longer needed, for example after it has been made the filter program
for a pcap structure by a call to pcap_setfilter().
pcap_datalink() returns the link layer type, e.g. DLT_EN10MB.
pcap_snapshot() returns the snapshot length specified when
pcap_open_live was called.
pcap_is_swapped() returns true if the current ``savefile'' uses a dif‐
ferent byte order than the current system.
pcap_major_version() returns the major number of the version of the
pcap used to write the savefile.
pcap_minor_version() returns the minor number of the version of the
pcap used to write the savefile.
pcap_file() returns the name of the ``savefile.''
int pcap_stats() returns 0 and fills in a pcap_stat struct. The values
represent packet statistics from the start of the run to the time of
the call. If there is an error or the under lying packet capture
doesn't support packet statistics, -1 is returned and the error text
can be obtained with pcap_perror() or pcap_geterr().
pcap_fileno() returns the file descriptor number of the ``savefile.''
pcap_perror() prints the text of the last pcap library error on stderr,
prefixed by prefix.
pcap_geterr() returns the error text pertaining to the last pcap
library error. NOTE: the pointer it returns will no longer point to a
valid error message string after the pcap_t passed to it is closed; you
must use or copy the string before closing the pcap_t.
pcap_strerror() is provided in case strerror(1) isn't available.
pcap_close() closes the files associated with p and deallocates
resources.
pcap_dump_close() closes the ``savefile.''
SEE ALSOtcpdump(1), tcpslice(1)AUTHORS
The original authors are:
Van Jacobson, Craig Leres and Steven McCanne, all of the Lawrence
Berkeley National Laboratory, University of California, Berkeley, CA.
The current version is available from "The Tcpdump Group"'s Web site at
http://www.tcpdump.org/
BUGS
Please send problems, bugs, questions, desirable enhancements, etc. to:
tcpdump-workers@tcpdump.org
Please send source code contributions, etc. to:
patches@tcpdump.org
3 January 2001 PCAP(3)