MAP3270(5)MAP3270(5)NAMEmap3270 - database for mapping ascii keystrokes into IBM 3270 keys
SYNOPSIS
/etc/map3270
DESCRIPTION
When emulating IBM-syle 3270 terminals under UNIX (see tn3270(1)), a
mapping must be performed between sequences of keys hit on a user's
(ascii) keyboard, and the keys that are available on a 3270. For
example, a 3270 has a key labeled EEOF which erases the contents of the
current field from the location of the cursor to the end. In order to
accomplish this function, the terminal user and a program emulating a
3270 must agree on what keys will be typed to invoke the EEOF function.
The requirements for these sequences are:
1.) that the first character of the sequence be outside of the
standard ascii printable characters;
2.) that no one sequence be an initial part of another (although
sequences may share initial parts).
FORMAT
The file consists of entries for various terminals. The first part of
an entry lists the names of the terminals which use that entry. These
names should be the same as in /etc/termcap (see termcap(5)); note that
often the terminals from various termcap entries will all use the same
map3270 entry; for example, both 925 and 925vb (for 925 with visual
bells) would probably use the same map3270 entry. After the names,
separated by vertical bars (`|'), comes a left brace (`{'); the
definitions; and, finally, a right brace (`}').
The definitions consist of a reserved keyword (see list below) which
identifies the 3270 function (extended as defined below), followed by
an equal sign (`='), followed by the various ways to generate this
particular function, followed by a semi-colon (`;'). Each way is a
sequence of strings of printable ascii characters enclosed inside
single quotes (`´'); various ways (options) are separated by vertical
bars (`|').
Inside the single quotes, a few characters are special. A caret (`^')
specifies that the next character is the ``control'' character of
whatever the character is. So, `^a' represents control-a, ie:
hexadecimal 1 (note that `^A' would generate the same code). To
generate rubout, one enters `^?'. To represent a control character
inside a file requires using the caret to represent a control sequence;
simply typing control-A will not work. Note: the ctrl-caret sequence
(to generate a hexadecimal 1E) is represented as `^^' (not `^\^').
In addition to the caret, a letter may be preceded by a backslash
(`\'). Since this has little effect for most characters, its use is
usually not recommended. For the case of a single quote (`´'), the
backslash prevents that single quote from terminating the string. To
have the backslash be part of the string, it is necessary to place two
backslashes ('\\') in the file.
In addition, the following characters are special:
`\E' means an escape character;
`\n' means newline;
`\t' means tab;
`\r' means carriage return.
It is not necessary for each character in a string to be enclosed
within single quotes. `\E\E\E' means three escape characters.
Comments, which may appear anywhere on a line, begin with a hash mark
(`#'), and terminate at the end of that line. However, comments cannot
begin inside a quoted string; a hash mark inside a quoted string has no
special meaning.
3270 KEYS SUPPORTED
The following is the list of 3270 key names that are supported in this
file. Note that some of the keys don't really exist on a 3270. In
particular, the developers of this file have relied extensively on the
work at the Yale University Computer Center with their 3270 emulator
which runs in an IBM Series/1 front end. The following list
corresponds closely to the functions that the developers of the Yale
code offer in their product.
In the following list, the starred ("*") functions are not supported by
tn3270(1). An unsupported function will cause tn3270(1) to send a bell
sequence to the user's terminal.
3270 Key Name Functional description
(*)LPRT local print
DP dup character
FM field mark character
(*)CURSEL cursor select
RESHOW redisplay the screen
EINP erase input
EEOF erase end of field
DELETE delete character
INSRT toggle insert mode
TAB field tab
BTAB field back tab
COLTAB column tab
COLBAK column back tab
INDENT indent one tab stop
UNDENT undent one tab stop
NL new line
HOME home the cursor
UP up cursor
DOWN down cursor
RIGHT right cursor
LEFT left cursor
SETTAB set a column tab
DELTAB delete a columntab
SETMRG set left margin
SETHOM set home position
CLRTAB clear all column tabs
(*)APLON apl on
(*)APLOFF apl off
(*)APLEND treat input as ascii
(*)PCON xon/xoff on
(*)PCOFF xon/xoff off
DISC disconnect (suspend)
(*)INIT new terminal type
(*)ALTK alternate keyboard dvorak
FLINP flush input
ERASE erase last character
WERASE erase last word
FERASE erase field
SYNCH we are in synch with the user
RESET reset key-unlock keyboard
MASTER_RESET reset, unlock and redisplay
(*)XOFF please hold output
(*)XON please give me output
ESCAPE enter telnet command mode
WORDTAB tab to beginning of next word
WORDBACKTAB tab to beginning of current/last word
WORDEND tab to end of current/next word
FIELDEND tab to last non-blank of current/next
unprotected (writable) field.
PA1 program attention 1
PA2 program attention 2
PA3 program attention 3
CLEAR local clear of the 3270 screen
TREQ test request
ENTER enter key
PFK1 program function key 1
PFK2 program function key 2
etc. etc.
PFK36 program function key 36
A SAMPLE ENTRY
The following entry is used by tn3270(1) when unable to locate a
reasonable version in the user's environment and in /etc/map3270:
name { # actual name comes from TERM variable
clear = '^z';
flinp = '^x';
enter = '^m';
delete = '^d' | '^?'; # note that '^?' is delete (rubout)
synch = '^r';
reshow = '^v';
eeof = '^e';
tab = '^i';
btab = '^b';
nl = '^n';
left = '^h';
right = '^l';
up = '^k';
down = '^j';
einp = '^w';
reset = '^t';
xoff = '^s';
xon = '^q';
escape = '^c';
ferase = '^u';
insrt = ' ';
# program attention keys
pa1 = '^p1'; pa2 = '^p2'; pa3 = '^p3';
# program function keys
pfk1 = '1'; pfk2 = '2'; pfk3 = '3'; pfk4 = '4';
pfk5 = '5'; pfk6 = '6'; pfk7 = '7'; pfk8 = '8';
pfk9 = '9'; pfk10 = ' '; pfk11 = '-'; pfk12 = '=';
pfk13 = ''; pfk14 = '@'; pfk15 = ' pfk17 = ''; pfk18 = '´; pfk19 = ''; pfk20 = ';
pfk21 = ' pfk22 = ''; pfk23 = '_'; pfk24 = '+';
}
IBM 3270 KEY DEFINITONS FOR AN ABOVE DEFINITION
The charts below show the proper keys to emulate each 3270 function
when using the default key mapping supplied with tn3270(1) and mset(1).
Command Keys IBM 3270 Key Default Key(s)
Enter RETURN
Clear control-z
Cursor Movement Keys
New Line control-n or
Home
Tab control-i
Back Tab control-b
Cursor Left control-h
Cursor Right control-l
Cursor Up control-k
Cursor Down control-j or
LINE FEED
Edit Control Keys
Delete Char control-d or
RUB
Erase EOF control-e
Erase Input control-w
Insert Mode ESC Space
End Insert ESC Space
Program Function Keys
PF1 ESC 1
PF2 ESC 2
... ...
PF10 ESC 0
PF11 ESC -
PF12 ESC =
PF13 ESC !
PF14 ESC @
... ...
PF24 ESC +
Program Attention Keys
PA1 control-p 1
PA2 control-p 2
PA3 control-p 3
Local Control Keys
Reset After Error control-r
Purge Input Buffer control-x
Keyboard Unlock control-t
Redisplay Screen control-v
Other Keys
Erase current field control-u
FILES
/etc/map3270
SEE ALSOtn3270(1), mset(1), Yale ASCII Terminal Communication System II Program
Description/Operator's Manual (IBM SB30-1911)
AUTHOR
Greg Minshall
BUGS
Tn3270 doesn't yet understand how to process all the functions
available in map3270; when such a function is requested tn3270 will
beep at you.
The definition of "word" (for "word delete", "word tab") should be a
run-time option. Currently it is defined as the kernel tty driver
defines it (strings of non-blanks); more than one person would rather
use the "vi" definition (strings of specials, strings of alphanumeric).
4.3 Berkeley Distribution January 11, 1986 MAP3270(5)