powerman-pdu(8) Network UPS Tools (NUT) powerman-pdu(8)NAMEpowerman-pdu - Driver for Powerman PDU
NOTE
This man page only documents the hardware‐specific features of the pow‐
erman-pdu driver. For information about the core driver, see nutups‐
drv(8).
SUPPORTED HARDWARE
This driver supports a wide range of PDUs through the Powerman project.
This includes various models from APC, Baytech, Cyclades, but also sup‐
port IPMI and various blade management modules from HP, IBM and Sun.
EXTRA ARGUMENTS
This driver doesn't support any optional setting.
VARIABLES
This driver doesn't (yet) support any changeable variable.
COMMANDS
The following commands are available for each outlet, with X for the
outlet number:
outlet.X.load.on
power on the outlet.
outlet.X.load.off
power off the outlet.
outlet.X.load.cycle
cycle the outlet (power off then power on, possibly with a
delay).
IMPLEMENTATION
The hostname of the Powerman server is specified using the "port" value
in ups.conf, i.e.:
[pdu]
driver = powerman-pdu
port = host.example.com:port
The port used to reach powermand is optional if the default port is
used.
KNOWN ISSUES
ups.status is still exposed, with the value "WAIT". Some other values
from the ups collection are also exposed.
AUTHOR
Arnaud Quette <arnaud.quette@gmail.com>
SEE ALSO
The core driver:
nutupsdrv(8)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
The PowerMan home page: http://powerman.sourceforge.net/
Wed Dec 24 2008 powerman-pdu(8)