SCSIADD(8) root tools SCSIADD(8)NAMEscsiadd - Add and remove SCSI devices
SYNOPSISscsiadd {-a|-r} <id>
scsiadd {-a|-r} <id> <lun>
scsiadd {-a|-r} <host> <id> <lun>
scsiadd {-a|-r} <host> <channel> <id> <lun>
scsiadd [-i maxid] -s <host>
scsiadd [-i maxid] -s <host> <channel>
scsiadd-p
DESCRIPTIONscsiadd adds and removes devices, scans for new devices, or prints the
status of the SCSI bus. The options are:
-a add device
-r remove device
-s scan for new devices
-p print SCSI status
-i set maximum SCSI ID which is scanned
FILESscsiadd need the /proc/scsi/scsi file to send its commands to the linux
kernel. In 2.6 kernels this file is considered deprecated and you have
to enable the following kernel option so this file is generated:
Device Drivers->SCSI device support->legacy /proc/scsi/ support
EXAMPLESscsiadd 3
add SCSI device with ID 3 on primary host
scsiadd-r 1
remove SCSI device with ID 1 from primary host
scsiadd-s
scan for new devices on primary device
scsiadd-a 1 2 13 4
add SCSI device with ID 13 and LUN 4 on host 1 channel 2
AUTHOR
Dirk Jagdmann <doj@cubic.org>
The latest version can be found at http://llg.cubic.org/tools
SEE ALSO
http://www.tldp.org/HOWTO/SCSI-2.4-HOWTO/index.html
Howto describing many aspects of the Linux 2.4.0 SCSI system
Dirk Jagdmann 1.96 SCSIADD(8)