xpdfrc(5)xpdfrc(5)NAMExpdfrc - configuration file for Xpdf tools (version 2.02)
DESCRIPTION
All of the Xpdf tools read a single configuration file.
If you have a .xpdfrc file in your home directory, it will
be read. Otherwise, a system-wide configuration file will
be read from /usr/local/etc/xpdfrc, if it exists. (This
is its default location; depending on build options, it
may be placed elsewhere.) On Win32 systems, the xpdfrc
file should be placed in the same directory as the exe-
cutables.
The xpdfrc file consists of a series of configuration
options, one per line. Blank lines and lines starting
with a '#' (comments) are ignored.
The following sections list all of the configuration
options, sorted into functional groups. There is an exam-
ples section at the end.
INCLUDE FILES
include config-file
Includes the specified config file. The effect of
this is equivalent to inserting the contents of
config-file directly into the parent config file in
place of the include command. Config files can be
nested arbitrarily deep.
CHARACTER MAPPING
nameToUnicode map-file
Specifies a file with the mapping from character
names to Unicode. This is used to handle PDF fonts
that have valid encodings but no ToUnicode entry.
Each line of a nameToUnicode file looks like this:
hex-string name
The hex-string is the Unicode (UCS-2) character
index, and name is the corresponding character
name. Multiple nameToUnicode files can be used; if
a character name is given more than once, the code
in the last specified file is used. There is a
built-in default nameToUnicode table with all of
Adobe's standard character names.
cidToUnicode registry-ordering map-file
Specifies the file with the mapping from character
collection to Unicode. Each line of a cidToUnicode
file represents one character:
hex-string
The hex-string is the Unicode (UCS-2) index for
that character. The first line maps CID 0, the
second line CID 1, etc. File size is determined by
size of the character collection. Only one file is
allowed per character collection; the last speci-
fied file is used. There are no built-in cidToUni-
code mappings.
unicodeMap encoding-name map-file
Specifies the file with mapping from Unicode to
encoding-name. These encodings are used for X dis-
play fonts and text output (see below). Each line
of a unicodeMap file represents a range of one or
more Unicode characters which maps linearly to a
range in the output encoding:
in-start-hex in-end-hex out-start-hex
Entries for single characters can be abbreviated
to:
in-hex out-hex
The in-start-hex and in-end-hex fields (or the sin-
gle in-hex field) specify the Unicode range. The
out-start-hex field (or the out-hex field) speci-
fies the start of the output encoding range. The
length of the out-start-hex (or out-hex) string
determines the length of the output characters
(e.g., UTF-8 uses different numbers of bytes to
represent characters in different ranges). Entries
must be given in increasing Unicode order. Only
one file is allowed per encoding; the last speci-
fied file is used. The Latin1, ASCII7, Symbol,
ZapfDingbats, UTF-8, and UCS-2 encodings are prede-
fined.
cMapDir registry-ordering dir
Specifies a search directory, dir, for CMaps for
the registry-ordering character collection. There
can be multiple directories for a particular col-
lection. There are no default CMap directories.
toUnicodeDir dir
Specifies a search directory, dir, for ToUnicode
CMaps. There can be multiple ToUnicode directo-
ries. There are no default ToUnicode directories.
DISPLAY FONTS
displayFontX PDF-font-name XLFD encoding-name
Maps a PDF font, PDF-font-name, to an X font, XLFD,
for display. The XLFD (X Logical Font Descriptor)
should contain the string "%s", which will be
replaced by xpdf with the font size. If the XLFD
contains spaces it must be quoted. The encod-
ing-name must be defined with the unicodeMap com-
mand (see above). By default, the Base-14 fonts
are mapped to standard X fonts, using the Latin1,
Symbol, and ZapfDingbats encodings.
displayFontT1 PDF-font-name T1-file
Maps a PDF font, PDF-font-name, to a Type 1 font
for display. The Type 1 font file, T1-file, should
be a standard .pfa or .pfb file.
displayFontTT PDF-font-name TT-file
Maps a PDF font, PDF-font-name, to a TrueType font
for display. The TrueType font file, TT-file,
should be a standard .ttf file.
displayNamedCIDFontX PDF-font-name XLFD encoding-name
Maps a specific PDF CID (16-bit) font,
PDF-font-name, to the X font, XLFD, for display.
The encoding given by encoding-name must be defined
with the unicodeMap command. There are no default
display CID font mappings.
displayCIDFontX registry-ordering XLFD encoding-name
Maps the registry-ordering character collection to
the X font, XLFD, for display. This mapping is
used if the font name doesn't match any of the
fonts declared with displayNamedCIDFont* commands.
The encoding given by encoding-name must be defined
with the unicodeMap command. There are no default
display CID font mappings.
displayNamedCIDFontT1 PDF-font-name T1-file
Maps a specific PDF CID (16-bit) font,
PDF-font-name, to a CID font (16-bit PostScript
font), for display. There are no default CID font
mappings.
displayCIDFontT1 registry-ordering T1-file
Maps the registry-ordering character collection to
a CID font (16-bit PostScript font), for display.
This mapping is used if the font name doesn't match
any of the fonts declared with displayNamedCIDFont*
commands. There are no default CID font mappings.
displayNamedCIDFontTT PDF-font-name TT-file
Maps a specific PDF CID (16-bit) font,
PDF-font-name, to a (16-bit) TrueType font, for
display. There are no default CID font mappings.
displayCIDFontTT registry-ordering TT-file
Maps the registry-ordering character collection to
a (16-bit) TrueType font, for display. This map-
ping is used if the font name doesn't match any of
the fonts declared with displayNamedCIDFont* com-
mands. There are no default CID font mappings.
fontDir dir
Specifies a search directory for external font
files. There can be multiple fontDir directories.
If a PDF file uses a font but doesn't embed it,
these directories will be searched for a matching
font file. These fonts are used by both xpdf (for
display) and pdftops (for embedding in the gener-
ated PostScript). Type 1 fonts must have a suffix
of ".pfa", ".pfb", ".ps", or no suffix at all.
TrueType fonts must have a ".ttf" suffix. Other
files in these directories will be ignored. There
are no default fontDir directories.
POSTSCRIPT CONTROL
psPaperSize width(pts)height(pts)
Sets the paper size for PostScript output. The
width and height parameters give the paper size in
PostScript points.
psPaperSize letter | legal | A4 | A3 | match
Sets the paper size for PostScript output to a
standard size. The default paper size is set when
xpdf and pdftops are built, typically to "letter"
or "A4". This can also be set to "match", which
will set the paper size to match the size specified
in the PDF file.
psDuplex yes | no
If set to "yes", the generated PostScript will set
the "Duplex" pagedevice entry. This tells duplex-
capable printers to enable duplexing. This
defaults to "no".
psLevel level1 | level1sep | level2 | level2sep | level3 |
level3Sep
Sets the PostScript level to generate. This
defaults to "level2".
psFont PDF-font-name PS-font-name
When the PDF-font-name font is used in a PDF file,
it will be translated to the PostScript font
PS-font-name, which is assumed to be resident in
the printer. Typically, PDF-font-name and
PS-font-name are the same. By default, only the
Base-14 fonts are assumed to be resident.
psNamedFont16 PDF-font-name wMode PS-font-name encoding
When the 16-bit font PDF-font-name is used in a PDF
file with the wMode writing mode and is not embed-
ded, the PS-font-name font is substituted for it.
The writing mode must be either 'H' for horizontal
or 'V' for vertical. The PS-font-name font is
assumed to be resident in the printer and to use
the specified encoding (which must have been
defined with the unicodeMap command).
psFont16 registry-ordering wMode PS-font-name encoding
When a 16-bit font using the registry-ordering
character collection and wMode writing mode is not
embedded and does not match any of the fonts
declared in psNamedFont16 commands, the
PS-font-name font is substituted for it. The writ-
ing mode must be either 'H' for horizontal or 'V'
for vertical. The PS-font-name font is assumed to
be resident in the printer and to use the specified
writing mode and encoding (which must have been
defined with the unicodeMap command).
psEmbedType1Fonts yes | no
If set to "no", prevents embedding of Type 1 fonts
in generated PostScript. This defaults to "yes".
psEmbedTrueTypeFonts yes | no
If set to "no", prevents embedding of TrueType
fonts in generated PostScript. This defaults to
"yes".
psEmbedCIDTrueTypeFonts yes | no
If set to "no", prevents embedding of CID TrueType
fonts in generated PostScript. For Level 3
PostScript, this generates a CID font, for lower
levels it generates a non-CID composite font.
psEmbedCIDPostScriptFonts yes | no
If set to "no", prevents embedding of CID
PostScript fonts in generated PostScript. For
Level 3 PostScript, this generates a CID font, for
lower levels it generates a non-CID composite font.
psOPI yes | no
If set to "yes", generates PostScript OPI comments
for all images and forms which have OPI informa-
tion. This option is only available if the Xpdf
tools were compiled with OPI support. This
defaults to "no".
psASCIIHex yes | no
If set to "yes", the ASCIIHexEncode filter will be
used instead of ASCII85Encode for binary data.
This defaults to "no".
psFile file-or-command
Sets the default PostScript file or print command
for xpdf. Commands start with a '|' character;
anything else is a file. If the file name or com-
mand contains spaces it must be quoted. This
defaults to unset, which tells xpdf to generate a
name of the form <file>.ps for a PDF file
<file>.pdf.
fontDir dir
See the description above, in the DISPLAY FONTS
section.
TEXT CONTROL
textEncoding encoding-name
Sets the encoding to use for text output. (This
can be overridden with the "-enc" switch on the
command line.) The encoding-name must be defined
with the unicodeMap command (see above). This
defaults to "Latin1".
textEOL unix | dos | mac
Sets the end-of-line convention to use for text
output. The options are:
unix = LF
dos = CR+LF
mac = CR
(This can be overridden with the "-eol" switch on
the command line.) The default value is based on
the OS where xpdf and pdftotext were built.
textKeepTinyChars yes | no
If set to "yes", text extraction will keep all
characters. If set to "no", text extraction will
discard tiny (smaller than 3 point) characters
after the first 20000 per page, avoiding extremely
slow run times for PDF files that use special fonts
to do shading or cross-hatching. This defaults to
"no".
MISCELLANEOUS SETTINGS
initialZoom -5..5 | page | width
Sets the initial zoom factor. A number (-5 .. 5)
specifies a zoom factor, where 0 means 72 dpi. You
may also specify 'page', to fit the page to the
window size, or 'width', to fit the page width to
the window width.
t1libControl none | plain | low | high
Sets the type of font rendering for t1lib (the Type
1 rasterizer) to use. Options are "none" (don't
use t1lib at all), "plain" (use non-anti-aliased
fonts), "low" or "high" (use low-level or high-
level anti-aliased fonts). This defaults to "low".
freetypeControl none | plain | low | high
Sets the type of font rendering for FreeType (the
TrueType rasterizer) to use. Options are "none"
(don't use FreeType at all), "plain" (use non-anti-
aliased fonts), "low" or "high" (use anti-aliased
fonts; these two are identical). This defaults to
"low".
urlCommand command
Sets the command executed when you click on a URL
link. The string "%s" will be replaced with the
URL. (See the example below.) This has no default
value.
movieCommand command
Sets the command executed when you click on a movie
annotation. The string "%s" will be replaced with
the movie file name. This has no default value.
mapNumericCharNames yes | no
If set to "yes", the Xpdf tools will attempt to map
various numeric character names sometimes used in
font subsets. In some cases this leads to usable
text, and in other cases it leads to gibberish --
there is no way for Xpdf to tell. This defaults to
"yes".
printCommands yes | no
If set to "yes", drawing commands are printed as
they're executed (useful for debugging). This
defaults to "no".
errQuiet yes | no
If set to "yes", this suppresses all error and
warning messages from all of the Xpdf tools. This
defaults to "no".
EXAMPLES
The following is a sample xpdfrc file.
# from the Thai support package
nameToUnicode /usr/local/share/xpdf/Thai.nameToUnicode
# from the Japanese support package
cidToUnicode Adobe-Japan1 /usr/local/share/xpdf/Adobe-Japan1.cidToUnicode
unicodeMap JISX0208 /usr/local/share/xpdf/JISX0208.unicodeMap
cMapDir Adobe-Japan1 /usr/local/share/xpdf/cmap/Adobe-Japan1
# use an X server font for Times-Roman
# (this is the built-in default)
displayFontX Times-Roman "-*-times-medium-r-normal-*-%s-*-*-*-*-*-iso8859-1" Latin1
# use the Base-14 Type 1 fonts from ghostscript
# (note that this overrides the displayFontX command above)
displayFontT1 Times-Roman /usr/local/share/ghostscript/fonts/n021003l.pfb
displayFontT1 Times-Italic /usr/local/share/ghostscript/fonts/n021023l.pfb
displayFontT1 Times-Bold /usr/local/share/ghostscript/fonts/n021004l.pfb
displayFontT1 Times-BoldItalic /usr/local/share/ghostscript/fonts/n021024l.pfb
displayFontT1 Helvetica /usr/local/share/ghostscript/fonts/n019003l.pfb
displayFontT1 Helvetica-Oblique /usr/local/share/ghostscript/fonts/n019023l.pfb
displayFontT1 Helvetica-Bold /usr/local/share/ghostscript/fonts/n019004l.pfb
displayFontT1 Helvetica-BoldOblique /usr/local/share/ghostscript/fonts/n019024l.pfb
displayFontT1 Courier /usr/local/share/ghostscript/fonts/n022003l.pfb
displayFontT1 Courier-Oblique /usr/local/share/ghostscript/fonts/n022023l.pfb
displayFontT1 Courier-Bold /usr/local/share/ghostscript/fonts/n022004l.pfb
displayFontT1 Courier-BoldOblique /usr/local/share/ghostscript/fonts/n022024l.pfb
displayFontT1 Symbol /usr/local/share/ghostscript/fonts/s050000l.pfb
displayFontT1 ZapfDingbats /usr/local/share/ghostscript/fonts/d050000l.pfb
# from the Japanese support package
displayCIDFontX Adobe-Japan1 "-*-fixed-medium-r-normal-*-%s-*-*-*-*-*-jisx0208.1983-0" JISX0208
# use the Bakoma Type 1 fonts
# (this assumes they happen to be installed in /usr/local/fonts/bakoma)
fontDir /usr/local/fonts/bakoma
# set some PostScript options
psPaperSize letter
psDuplex no
psLevel level2
psEmbedType1Fonts yes
psEmbedTrueTypeFonts yes
psFile "| lpr -Pprinter5"
# assume that the PostScript printer has the Univers and
# Univers-Bold fonts
psFont Univers Univers
psFont Univers-Bold Univers-Bold
# set the text output options
textEncoding UTF-8
textEOL unix
# misc options
t1libControl low
freetypeControl low
urlCommand "netscape -remove 'openURL(%s)'"
FILES
/usr/local/etc/xpdfrc
This is the default location for the system-wide
configuration file. Depending on build options, it
may be placed elsewhere.
$HOME/.xpdfrc
This is the user's configuration file. If it
exists, it will be read in place of the system-wide
file.
AUTHOR
The Xpdf software and documentation are copyright
1996-2003 Glyph & Cog, LLC.
SEE ALSOxpdf(1), pdftops(1), pdftotext(1), pdfinfo(1),
pdftopbm(1), pdfimages(1)
http://www.foolabs.com/xpdf/
24 March 2003 xpdfrc(5)