UPS.CONF(5) Network UPS Tools (NUT) UPS.CONF(5)NAMEups.conf - UPS definitions for Network UPS Tools
DESCRIPTION
This file is read by the driver controller upsdrvctl, the
UPS drivers that use the common core (see nutupsdrv(8))
and upsd(8). Each UPS gets its own section, and that sec-
tion contains a number of directives that set parameters
for that UPS.
The section begins with the name of the ups in brackets,
and continues until the next UPS name in brackets or until
EOF. The name "default" is used internally in upsd, so
you can't use it in this file.
You must define the "driver" and "port" elements for each
entry. Anything after that in a section is optional. A
simple example might look like this:
[myups]
driver = fentonups
port = /dev/ttyS0
A slightly more complicated version includes some extras
for the hardware-specific part of the driver:
[bigups]
driver = apcsmart
port = /dev/cua00
cable = 940-0095B
sdtype = 2
In this case, the apcsmart(8) driver will receive vari-
ables called "cable" and "sdtype" which have special mean-
ings. See the man pages of your driver(s) to learn which
variables are supported and what they do.
FIELDS
driver Required. This specifies which program will be
monitoring this UPS. You need to specify the one
that is compatible with your hardware. See nutups-
drv(8) for more information on drivers in general
and pointers to the man pages of specific drivers.
port Required. This is the serial port where the UPS is
connected. On a Linux system, the first serial
port usually is /dev/ttyS0. On FreeBSD and similar
systems, it probably will be /dev/cuaa0.
sdorder
Optional. When you have multiple UPSes on your
system, you usually need to turn them off in a cer-
tain order. upsdrvctl shuts down all the 0s, then
the 1s, 2s, and so on. To exclude a UPS from the
shutdown sequence, set this to -1.
The default value for this parameter is 0.
nolock Optional. When you specify this, the driver skips
the port locking routines every time it starts.
This may allow other processes to seize the port if
you start more than one accidentally.
You should only use this if your system won't work
without it.
This may be needed on Mac OS X systems.
maxstartdelay
Optional. This can be set as a global variable
above your first UPS definition and it can also be
set in a UPS section. This value controls how long
upsdrvctl will wait for the driver to finish start-
ing. This keeps your system from getting stuck due
to a broken driver or UPS.
The default is 45 seconds.
All other fields are passed through to the hardware-spe-
cific part of the driver. See those manuals for the list
of what is allowed.
INTEGRATIONupsdrvctl(8) uses this file to start and stop the drivers.
The drivers themselves also obtain configuration data from
this file. Each driver looks up its section and uses that
to configure itself.
upsd(8) learns about which UPSes are installed on this
system by reading this file. If this system is called
"doghouse" and you have defined a UPS in your ups.conf
called "snoopy", then you can monitor it from upsc(8) or
similar as "snoopy@doghouse".
Additionally, the first UPS in this file is the default
ups in upsd. If you tell one of the clients to monitor a
UPS by the hostname alone ("doghouse", without any @ or
ups name), it uses the default UPS. If you have multiple
UPSes or if you just want to avoid ambiguities, always
specify the upsname and hostname with the client software.
SEE ALSOupsd(8), nutupsdrv(8), upsdrvctl(8)
Internet resources:
The NUT (Network UPS Tools) home page:
http://www.exploits.org/nut/
NUT mailing list archives and information:
http://lists.exploits.org/
Wed Oct 16 2002 UPS.CONF(5)