AURECORD(1)AURECORD(1)NAMEaurecord - record a sound file from a Network Audio System
server
SYNOPSISaurecord [-audio servername] [-file format] [-data format]
[-rate sample rate] [-mode input mode] [-gain input gain]
[-time seconds] [-comment comment] [-?] filename
DESCRIPTION
The aurecord program can be used to record audio data from
a Network Audio System server into a file. The recording
will continue until either the specified time has elapsed
or aurecord receives a SIGINT or SIGTERM signal.
OPTIONS
The following options may be used with the aurecord pro
gram:
-audio servername
The Network Audio System server from which the
file should be recorded.
-file format
The file format to be used for the recorded audio
data. The -? option will display a list of valid
file formats. The default file format is
Sun/NeXT.
-data format
The data format to be used for the recorded audio
data. The -? option will display a list of valid
data formats. Note that each file format may only
support selected data formats. The default data
format is 8-bit uLAW.
-rate sample rate
The sampling rate (in hertz) for the recording.
The default rate is 8000 Hz.
-mode input mode
Some Network Audio System servers may have differ
ent input amplification modes for microphone input
versus line level input. This option allows the
amplification mode to be specified. The two modes
available are "mic" for microphone input and
"line" for line level input. The default mode is
"mic".
-gain input gain
The input gain level in percent. The default is
75%.
1
AURECORD(1)AURECORD(1)-time seconds
The time, in seconds, for the recording. If this
option is not used, aurecord will record until a
SIGINT or SIGTERM signal is received.
-comment comment
A comment to be stored in the data file.
-? Displays a usage message and a list of supported
file and data formats.
SEE ALSOnas(1)COPYRIGHT
Copyright 1993, 1994 Network Computing Devices, Inc.
AUTHOR
Greg Renda, Network Computing Devices, Inc.
2